Has anyone .........
Discussion
noble girl said:
Fitted the Noblemods LED side repeaters. If so how easy are they to fit. The front replacement lenses look dead easy as I guess they are direct replacement but for the side ones do you need new wiring etc. Just thought I would give the M12 a "face lift" for the Spring.
Very easy, straight swap. about a ten min job.
noble girl @ 4.49am said:
Many thanks. Off to order a set.
Could you not sleep for thinking about it? Had to order them at 5am!! Thats dedication! Very cool!
Both side and front are very simple to swop. The led ones look cool but unfortunatly, we as drivers rearly get to see them in action.
G
Warning, this can be a 5 minute each job or not - mine took one hour one side and 5 mins the other! Note that the adhesive on the rubber could have dried out in storage (like mine did!) so you may need extra glue. Alos try not to drop the cable inside the hole or you'll need to take the inner panel off or go fishing in the dark! 
noble girl said:
Many thanks. Good tip about not losing the wires. Do they ever need removing once fitted (you mentioned gluing) or are the LEDs pretty robust.
Hi, LED's by design should last as long as the car - suggest you make sure the connections are good before closing up and maybe add a dab of epoxy resin to the rubber as the stock adhesive is so-so and gets worse after washing.
BTW, do you realise that they come in various colours (I've even seen a green one for our Spanish branch!)?!
Gassing Station | Noble | Top of Page | What's New | My Stuff