Driver's Door not locking
Discussion
Hi,
Seems to be two general causes:
If you get a locking noise but it does not lock then the cable on the end of the actuator needs adjusting. If you don't get a locking noise then the connection half way down the door where the end of the actuator wire and the wireing loom join has come apart (on mine this was just a spade connector pushed together)
Take the door panel off as per Justin's guide on his web site and have a quick look - shouldn't take very long, but you need long arms to get to the wing nuts.
HTH,
Rob.
Seems to be two general causes:
If you get a locking noise but it does not lock then the cable on the end of the actuator needs adjusting. If you don't get a locking noise then the connection half way down the door where the end of the actuator wire and the wireing loom join has come apart (on mine this was just a spade connector pushed together)
Take the door panel off as per Justin's guide on his web site and have a quick look - shouldn't take very long, but you need long arms to get to the wing nuts.
HTH,
Rob.
Gassing Station | Noble | Top of Page | What's New | My Stuff


