steering rack noble m12gto 2.5

[jannijland]

I am looking for a steeringrack of a noble m12 but it must be lefthanddrive
can anyone tell me what type of steeringrack Noble used on the first m12 cars?
yes I am currently undertaking an attempt to convert to left hand drive
would appreciate the help
also I tried to contact the facebook group but it is easier to score plutonium on the dark web than become a member of this group?
Or am I stupid?

[J50N WA]

have you tried the US guys for info. http://www.nobleforums.com/

[jannijland]

thanks for your tip!
I found out it's a Noble thing that makes it special, the pinion spline is customized by Noble to adapt the steeringcolumn,
next problem is the dashboard

[jannijland]

We have made a mould for the dash,this is the first copy
so it makes a conversion easy
maybe someone is interested in a copy?

[jannijland]

I have an omex ECU and I would lik to install an MBE
is it possible that Trevor Jasper sells these and can I use the old harness or would it have to be repinned?
short:I would like to get in contact withTrevor Jasper , somebody can help me with an adress?

[andygtt]

The MBE is rubbish and your limited to only a few mappers, Id never go back to a MBE... either upgrade the Omex or get it properly mapped.

[jannijland]

Thanks
Would you someone who can remap the OMEX?

[GTO600]

Noble Motorsport or Trevor Jasper (Yellowshed)

[jannijland]

thank you!

[andygtt]

GTO600 said:

Noble Motorsport or Trevor Jasper (Yellowshed)

They are the only people you use to remap the MBE as they have the unlock codes (codes are not available to anyone else)..... you can use almost any reputable tuner to map the Omex as it shouldn't be locked.

Where are you based? as that will dictate who is best for you to use.

[Skorpion427]

Jan is located in the Netherlands

[andygtt]

I suspected he was overseas.... You local to a guy in Belgium called Andy D (not me), he has two noble one heavily modified track car so is a good person to speak with.

Not sure if he is on PH, he is active on the FB page however