Wiper arms - What are they off ?

Wiper arms - What are they off ?

Author
Discussion

jl34

Original Poster:

537 posts

244 months

Monday 16th May 2016
quotequote all
Cant find in the noble wiki , does anyone know what they are off ? Mines a 2003 3R.

thanks.


andygtt

8,345 posts

271 months

Monday 16th May 2016
quotequote all
Lots of debate over the years but no-one has ever found a car that they are from.... personally I think they are modified items that only fit the Noble.


jl34

Original Poster:

537 posts

244 months

Monday 16th May 2016
quotequote all
blimey thats worrying as i need 2 of them , the teeth have worn.


M.Ako

105 posts

113 months

Monday 16th May 2016
quotequote all
Like Andy says, lots of debates on this one. Think they are about £80 to replace. I had a new screen replaced recently and asked the question to the 2 repair men, both came back with early Corsa,

S B C

276 posts

196 months

Monday 16th May 2016
quotequote all
I got one off a Mondeo, but I've never found one the same since.

Green3R

400 posts

255 months

Monday 16th May 2016
quotequote all
given the source of the screen, is it possible it's Lotus Elan M100?

If it were then I also found there's a single wiper conversion kit that sweeps full left-right
https://www.youtube.com/watch?feature=player_detai...

andygtt

8,345 posts

271 months

Tuesday 17th May 2016
quotequote all
I modified/bastardised the standard mechanism to relocate the wiper to dead centre and run a single wiper.... total cost of the single 24inch wiper blade and saved 1.5kgs in weight smile

In the below pic my car is dirty so you can see the sweep of the wiper lol





Edited by andygtt on Tuesday 17th May 13:02

dave sutton

213 posts

155 months

Tuesday 17th May 2016
quotequote all
I have a single 26-ish blade on the driver's side spindle.

Midlifecrisis71

2,871 posts

282 months

Tuesday 17th May 2016
quotequote all
dave sutton said:
I have a single 26-ish blade on the driver's side spindle.
me too - looks good, i was even able to drop mine a click or two on the spindle so it sits flat flush with the clam and still wipes accross enough

By the way - im loving the picture of the carbon car with the engine in the background

jl34

Original Poster:

537 posts

244 months

Wednesday 18th May 2016
quotequote all
what arm did you use for the single blade conversions ?

andygtt

8,345 posts

271 months

Wednesday 18th May 2016
quotequote all
jl34 said:
what arm did you use for the single blade conversions ?
For mine I simply reshaped the original noble one... for the others they simply reuse the original noble arm with a large blade, technically not fully legal as it doesn't sweep passenger side fully, however its unlikely it would ever be called out by Mot or copper as its pretty close to being legal and its only the passenger side smile

My wife insists on a cushion to see over the wipe arm smile

thebraketester

14,708 posts

145 months

Wednesday 18th May 2016
quotequote all
andygtt said:
I modified/bastardised the standard mechanism to relocate the wiper to dead centre and run a single wiper.... total cost of the single 24inch wiper blade and saved 1.5kgs in weight smile

In the below pic my car is dirty so you can see the sweep of the wiper lol





Edited by andygtt on Tuesday 17th May 13:02
I have nothing to add other than that carbon fibre is pure porn. Christian von Koenigsegg would be proud of that.

dave sutton

213 posts

155 months

Wednesday 18th May 2016
quotequote all
andygtt said:
simply reuse the original noble arm with a large blade
+1 - never queried in MOT yet