Cold starting/cold idle

Cold starting/cold idle

Author
Discussion

stevegto3

Original Poster:

428 posts

144 months

Wednesday 29th April 2015
quotequote all
Hi Guys

having a wierd issue. When i cold start the car the idle hunts wildly, goes from 1000k to 300rpm to virtually stall. I have to keep the revs up for about 3-4 mins and then it settles just at normal idle.

Just done Brands hatch and same thing after a run, car sits for a while then starting cold ish and it feels like it will stall. Rev it for a bit then it settles.

Any thoughts? Lamda sensor, fuel pump?

cheers
steve

AMG Merc

11,954 posts

260 months

Wednesday 29th April 2015
quotequote all
Have you checked that the rubber vacuum pipe/s under the throttle body, etc. aren't pushed on too far?

stevegto3

Original Poster:

428 posts

144 months

Wednesday 29th April 2015
quotequote all
Someone mentioned a vac pipe - where is that one located?

Rob_W

1,070 posts

221 months

Thursday 30th April 2015
quotequote all
It's the right angled connector on the left that you need to ensure isn't pushed fully on.

stevegto3

Original Poster:

428 posts

144 months

Friday 1st May 2015
quotequote all
Thanks Rob

I assume if its pushed too far on the pipe on the controller hits the 90 degree bend, therefore reducing the airflow? How far should it be on?

Steve

Rob_W

1,070 posts

221 months

Friday 1st May 2015
quotequote all
You need to get yourself a copy of the build manual Steve. Here's the rest of the info I was too lazy to post earlier....


I have done the second fix after I had emissions problems for the MOT, see other thread

stevegto3

Original Poster:

428 posts

144 months

Friday 1st May 2015
quotequote all
Hi Rob - thanks thats great. ive got the build manual but couldnt find that bit (i was looking on my phone)

I must admit my car does seem to run rich as the exhaust its a really sooty.

Ill check out the tube tomorrow and see how far its pushed on.

Thanks
Steve