MBE ecu

[Lofty999]

Anybody got access to a wiring diagram for my auto electrician for the mbe ecu please.Hes after the grey plug details,means nothing to me,but hoping he may be able to repair.If not where's the best place to find one,am I right in thinking they cost around £800?He already has ecu wiring details from the forum,just needs more details.Any help greatly appreciated.

Steve

[V1DL3R]

I don't think one exists. I went through the same a few months ago. I couldn't find anything which gave any sort of hint to which pin did which. Your best bet is to try and grab someone who has an mbe with the old type connection and swap it out for testing.

[Lofty999]

V1DL3R said:

I don't think one exists. I went through the same a few months ago. I couldn't find anything which gave any sort of hint to which pin did which. Your best bet is to try and grab someone who has an mbe with the old type connection and swap it out for testing.

Cheers Mitch,my auto electrician is going to try his luck and has taken it away with him.How much did you pay for your new ecu and where from,if you don't mind me asking?

Cheers steve

[TuxMan]

Jetstream are the best place , they do a upgraded new MBE ecu that pretty much fits on the std loom . The old ecu is not available anymore .

[Lofty999]

TuxMan said:

Jetstream are the best place , they do a upgraded new MBE ecu that pretty much fits on the std loom . The old ecu is not available anymore .

Cheers tux

[daddysumo]

I sent you an email a couple of days ago

[Lofty999]

daddysumo said:

I sent you an email a couple of days ago

Sorry,will check. Cheers steve

[V1DL3R]

The new Jetstream ECU has an obd port too which makes it much easier to diagnose faults in the future!