More welding exhaust bracket again!
Discussion
Right still having teething problems since Noble ownership.
My Noble had a knocking noise around three months ago which turned out to be an exhaust bracket. 300 or so quid later the guys down in a 'Valley that's full of Moles' had done the welding. Problem solved.
I went from 1st to 2nd gear ealier (giving it some)in the week and guess what...its back.
I obviously don't want to have to pay for the same thing to be fixed.(which hopefully i wont) So, either it wasn't done successfully the first time or its a fault with the brackets.
Could anyone shed any light on this for me? is more welding worth it? would a recently welded part just brake again under stress?
Many thanks
My Noble had a knocking noise around three months ago which turned out to be an exhaust bracket. 300 or so quid later the guys down in a 'Valley that's full of Moles' had done the welding. Problem solved.
I went from 1st to 2nd gear ealier (giving it some)in the week and guess what...its back.
I obviously don't want to have to pay for the same thing to be fixed.(which hopefully i wont) So, either it wasn't done successfully the first time or its a fault with the brackets.
Could anyone shed any light on this for me? is more welding worth it? would a recently welded part just brake again under stress?
Many thanks
Yes I'm pretty certain it is, can't believe its happened this quick again.
It is expensive but I dont know of another place I can take my car for the welding. Annoying.
It is expensive but I dont know of another place I can take my car for the welding. Annoying.
Plumber1 said:
Is it the bracket attached to the pipe and silencer on passenger side, if so it will keep braking, lost count how many times mine has been rewelded, if you don't get it done it then breaks the weld on the box, £300 sounds a lot
Yes, that's true.
I just need to make sure it definitely is that bracket. Just thought a specialist will know what to look for.
I suppose it will be obvious. (hopefully)
I just need to make sure it definitely is that bracket. Just thought a specialist will know what to look for.
I suppose it will be obvious. (hopefully)
Blu3R said:
How about any backstreet garage who own a welder? I paid £20 to have mine welded last year, been fine since.
MV fixed mine under warranty. Before that had it welded twice whilst driving around Europe. I just popped into a garage in Italy and they did it for free. Still went again though.
MV fixed a new bracket to the exhaust. Did they do this? Will try and get a pic tomorrow for you.
MV fixed a new bracket to the exhaust. Did they do this? Will try and get a pic tomorrow for you.
Edited by Fett on Monday 18th June 23:40
Plumber1 said:
It's a ten minute job to weld, but it will break again, there are a few fixes on the forum when the search works, just had mine welded, best fix is to get new exhaust, as I am trying to do 
Yes I will be looking for a new exhaust soon. I know there are a few examples out there but haven't made my mind up yet.
Fett said:
MV fixed mine under warrenty. Before that had it welded twice whilst driving around Europe. I just popped into a garage in Italy and they did it for free. Still went again though.
MV fixed a new bracket to the exhaust. Did they do this? Will try and get a pic tomorrow for you.
No they just welded it. MV fixed a new bracket to the exhaust. Did they do this? Will try and get a pic tomorrow for you.
You dont know the cost of a new bracket do you?
Picture would be great

Plumber1 said:
this is the offending item, had mine welded yesterday lasts about 500 miles, it then cracks joint on back box, cant believe MV charged £300 
one of the fixes was to make a new bracket and weld it on vertically, so it was standing up, not lying flat
Did the welder have a Labrador by any chance?one of the fixes was to make a new bracket and weld it on vertically, so it was standing up, not lying flat

Gassing Station | Noble | Top of Page | What's New | My Stuff



