Gallardo Brake Rotor Change
Discussion
Hey guys.
Helping a mate change the rotors front and rear and pads on his Gallardo. I've done plenty on other cars, 911's etc. Anything I need to know?
If anyones done the DIY and can give me some steps or pointers to follow, tools needed etc I'd really appreciate it.
Posting from NZ
Helping a mate change the rotors front and rear and pads on his Gallardo. I've done plenty on other cars, 911's etc. Anything I need to know?
If anyones done the DIY and can give me some steps or pointers to follow, tools needed etc I'd really appreciate it.
Posting from NZ
Edited by Kiwi Carguy on Friday 20th October 10:21
On the LP, it was straight forward. Knock the pins out the calipers, remove the pads, unbolt the calipers, remvoe the phillips screw holding the disc onto the hub.
On the rear you need to also remove the handbrake caliper and for this I loosened the brake cables at the handbrake inside the car, and then removed the cable at each caliper.
No issues....
On the rear you need to also remove the handbrake caliper and for this I loosened the brake cables at the handbrake inside the car, and then removed the cable at each caliper.
No issues....
Gassing Station | Gallardo/Huracan | Top of Page | What's New | My Stuff