458 brake pads

Author
Discussion

Jules360

Original Poster:

1,949 posts

208 months

Monday 11th July 2016
quotequote all
I had the car serviced last week. The dealer told me the pads were down to 1mm all round. I'm having the tyres changed today so took a look at the pads. They all look fine to me or am I missing something ?

All look exactly like this ...

mib484

27 posts

206 months

Monday 11th July 2016
quotequote all
could be they mean 1mm from wear indicator wires usually located just less than half the pad?

mike01606

531 posts

155 months

Monday 11th July 2016
quotequote all
What about the inner pad also?

Jules360

Original Poster:

1,949 posts

208 months

Tuesday 12th July 2016
quotequote all
Inside pads look the same as the one in the picture.


anonymous-user

60 months

Tuesday 12th July 2016
quotequote all
Hmm. Well as you rightly point out, there's plenty left on those pads. Comment re wear indicators is also valid though.

Edited by anonymous-user on Tuesday 12th July 08:02

JohnG123

633 posts

136 months

Tuesday 12th July 2016
quotequote all
Just curious how many miles on the car ?

mwstewart

7,924 posts

194 months

Tuesday 12th July 2016
quotequote all
It can't be 1mm or the discs would be toast. There are metal retaining pins that protrude about 4.5mm into the pad and although they are soft metal, they still score the discs quite badly.

Jules360

Original Poster:

1,949 posts

208 months

Tuesday 12th July 2016
quotequote all
JohnG123 said:
Just curious how many miles on the car ?
27,000 kms. I bought it used at 12,000. No idea if it had a set of pads before then.