Panel gap 718 - with photos

[GE90]

I would appreciate thoughts on this rear hatch panel gap difference.

No obvious sign of repair, but is this typical?

Thanks!

[scrounger73]

It's most definately off.

Have a look at this thread on how to adjust. Pretty simple to do but as with anything, take your time.

https://www.718forum.com/threads/diy-rear-spoiler-...

Tip. Put 2 cloths around the spoiler struts when removing the spoiler screws to prevent them falling down the hole.

[GE90]

Thanks very much.

I’m more thinking the gaps each side if the hatch, being tighter on the left hand side.

Cheers.

[scrounger73]

In general panel gaps should be pretty consistent however, Porsche have their flaws. My son's £7k Picanto has better build quality in some areas.

As I mentioned in your other post, do a Carvertical check or pay for a full PPI. Well worth the money. If you're buying from an OPC, they are obliged to tell you if it's been repaired. It may also be also worth asking a friend or someone local to you who knows his Porkers, to come and have a look with you. Second set of eyes and not blinkered by giddiness, if you know what I mean.

[scrounger73]

It doesn't help that the rear wing is out of line but this is pretty common even from the factory. I've had to adjust the rear wing on both my 718s.