Slight clonk over bumps
Discussion
I have an annoying clonk over bumps from the rear of my 986 Boxster S. Not on undulations but on and off speed bumps and bad road surfaces. It's not the suspension, it's been checked, and the position of the noise moves if the hood is down.
I've put the hood in the service position and the only thing I can find that is loose is in the picture below (yes it needs cleaning!):
The strut can be wiggled and there is lateral movement at the upper spring washer, so I'm thinking of removing the it and putting a spacer / washer below it. However, this 'slack' movement may be necessary.
Has anybody sourced this as the cause of a clonk or should I be looking elsewhere?
I've put the hood in the service position and the only thing I can find that is loose is in the picture below (yes it needs cleaning!):
The strut can be wiggled and there is lateral movement at the upper spring washer, so I'm thinking of removing the it and putting a spacer / washer below it. However, this 'slack' movement may be necessary.
Has anybody sourced this as the cause of a clonk or should I be looking elsewhere?
Gassing Station | Boxster/Cayman | Top of Page | What's New | My Stuff