991 Turbo S / GTS wheels on 991.1 Carrera S?

[I 8 a 4RE]

The Turbo S / GTS wheels come with a central wheel nut.
Like so; https://goo.gl/images/47MT8U

The Carrera S 991.1 has a 5 bolt pattern.
Like so; https://goo.gl/images/mXjcGC

Does anyone know if the Turbo S / GTS wheels have ever been made with a 5 bolt pattern (and perhaps a central faux wheenut cover plate) to fit a 991.1 S?

[kev.RS]

Don’t forget that the Turbos and GTS’ are wide body and have different offset rear wheels compared to the C2S and don’t think that they even did a narrow body option Turbo S wheel option.
Only other option would be a set of non S turbo wheels that are 5 stud rather than centre locks.

https://www.design911.co.uk/mobile/#part;id=130898

[STiG911]

kev.RS said:

Don’t forget that the Turbos and GTS’ are wide body and have different offset rear wheels compared to the C2S and don’t think that they even did a narrow body option Turbo S wheel option.
Only other option would be a set of non S turbo wheels that are 5 stud rather than centre locks.

https://www.design911.co.uk/mobile/#part;id=130898

^What he said

[arcamalpha]

There are some 5-bolt wheels in a GTS styl: Macan and Panameras have both had GTS wheels with 5 bolts for example. But not sure you'd get the right offset as the others have said.

[I 8 a 4RE]

kev.RS said:

Don’t forget that the Turbos and GTS’ are wide body and have different offset rear wheels compared to the C2S and don’t think that they even did a narrow body option Turbo S wheel option.
Only other option would be a set of non S turbo wheels that are 5 stud rather than centre locks.

https://www.design911.co.uk/mobile/#part;id=130898

I did not think of that, but obviously true. Thank you.
My vision is now in tatters =P

[kev.RS]

You could always convert your car to centre locks and buy a set of GT3 wheel as they are for narrow body and make your car look like a GT3 Touring!
Alternatively if you really did have your heart set on Turbo S wheels then you could just get a machine shop to take a few MM from the inside of the rear wheels ( fronts are same on both bodies) to bring it in a bit so they would fit.



https://www.design911.co.uk/mobile/#part;id=13769

Edited by kev.RS on Saturday 9th June 08:08