help please - new sub not working
Discussion
Bought a FLI active sub from halfords today.
Installed correctly - I am sure of it
The sub has a status light green for ok, red somethings up etc
Now I wired the switch cable to a fuse in the fusebourd as i did not want to start hacking at the headunit etc is it not working because its not wired to the head unit?! I cant see why though as its only an on/off switch...
Brand new JVC head unit too
Any ideas?
Installed correctly - I am sure of it
The sub has a status light green for ok, red somethings up etc
Now I wired the switch cable to a fuse in the fusebourd as i did not want to start hacking at the headunit etc is it not working because its not wired to the head unit?! I cant see why though as its only an on/off switch...
Brand new JVC head unit too
Any ideas?
I'm not sure I follow you, are you meaning you connected the small blue wire via a switch to the fuse? If so this is your problem I think, this needs to be connected to the remote cable coming from the head unit. Also, is the head unit able to take subs? Many people don't realise some aren't.
Also, anything I have mentioned about electrics may be complete tosh, I'm thinking out loud.
Also, anything I have mentioned about electrics may be complete tosh, I'm thinking out loud.
If you have correctly connected the Power wire (probably red), the earth wire (probably black or brown) and the trigger wire (more than likely blue) and the input cables from the "line out" on the rear of the head unit then it should work.
If one or more is not right then it will not work.
Some headunits need the trigger wire output turning on in a menu, normally its labelled "AUX ON/OFF" you need it to "on" obviously.
If one or more is not right then it will not work.
Some headunits need the trigger wire output turning on in a menu, normally its labelled "AUX ON/OFF" you need it to "on" obviously.
Getragdogleg said:
If you have correctly connected the Power wire (probably red), the earth wire (probably black or brown) and the trigger wire (more than likely blue) and the input cables from the "line out" on the rear of the head unit then it should work.
If one or more is not right then it will not work.
Some headunits need the trigger wire output turning on in a menu, normally its labelled "AUX ON/OFF" you need it to "on" obviously.
Right, the only thing I have done differantly from the instructions is wire the switch cable to the ignition fuse in the fuse bourd, could that be the problemIf one or more is not right then it will not work.
Some headunits need the trigger wire output turning on in a menu, normally its labelled "AUX ON/OFF" you need it to "on" obviously.
I cant see how though becase the power is on etc and everthing is ok according to the green light...
wolfy1988 said:
Now I wired the switch cable to a fuse in the fusebourd as i did not want to start hacking at the headunit etc is it not working because its not wired to the head unit?! I cant see why though as its only an on/off switch...
The Rca leads/ speakers in some way should be. I'm just wondering how it gets the sound if you haven't had the head unit out. The unit could be live and just getting no input. No idea if you have that in hand or not it just wasn't mentioned in your post.Like you and others have said the relay/ trigger wire should not matter. As long as that is there when you trigger a live feed on that wire it will work. That is subject to the main 12v feed and earth being ok too.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff