Rover SD1 gear box oil change
Discussion
Jamiezt190 said:
Help - I have a rover SD1 gear box in an MGB V8 conversion. Not sure whether it is an LT77 or R380 box or other. Cannot find a filler bolt on either side, looks like I may have a pump at front of gear box though, can anyone help?
Is reverse top left or bottom right?In Land Rover circles I move in Top Left = LT77, bottom right = R380, just in case it helps.

Edited by eltax91 on Sunday 1st August 21:56
There are some pictures of LT77 and R380 gearboxes here in which the locations of the level plugs are visible. Does yours look different?
fwiw, my LT77's filler plug has a 1/2" square peg to unscrew it and the gearbox needs filling with ATF rather than EP90. iirc there's a little plastic filter behind one of the plugs that you have to inspect and clean out periodically. I think it's on the drain plug but it's a while since I've changed the oil. (Note to self...)
fwiw, my LT77's filler plug has a 1/2" square peg to unscrew it and the gearbox needs filling with ATF rather than EP90. iirc there's a little plastic filter behind one of the plugs that you have to inspect and clean out periodically. I think it's on the drain plug but it's a while since I've changed the oil. (Note to self...)
Gassing Station | General Gassing | Top of Page | What's New | My Stuff