Scratch remover
Discussion
Right a bit boring, but in the states they seem to have loads of stuff available to remove scratches from paintwork, ' Maguires No 9' etc, apart from T-cut whats available over here and where can you get it.
(not an internet site I need it for friday)
Some are swirly and some proper scratches
Ta much
G
(not an internet site I need it for friday)
Some are swirly and some proper scratches
Ta much
G
Theres a place in Slough (not too far from you) called JC Paint Supplies. They are very very very good and carry a very comprehensive range.
There are a number of rubbing compounds that are prefixed by a 'G'. There is G3 that I have used and G11 that someone else mentioned and I think that there are all the numbers in between that relate to the grade of cut they provide. They are used in conjunction with a machine polish (by hand though oddly) and are much much much better than t-cut but also a little pricey. The cutting compound and the polish runs to about £30.
HTH
Matt.
There are a number of rubbing compounds that are prefixed by a 'G'. There is G3 that I have used and G11 that someone else mentioned and I think that there are all the numbers in between that relate to the grade of cut they provide. They are used in conjunction with a machine polish (by hand though oddly) and are much much much better than t-cut but also a little pricey. The cutting compound and the polish runs to about £30.
HTH
Matt.
Gassing Station | General Gassing [Archive] | Top of Page | What's New | My Stuff