Removing Hammerite from ones hand

Removing Hammerite from ones hand

Author
Discussion

Graham.J

Original Poster:

5,420 posts

266 months

Monday 30th June 2003
quotequote all


I put a coat of hammerite on my handbrake lever as some of the paint had come off and it was looking a bit shabby, then went off to finish painting off the bootbox replacement cover thingy (which looks sh*t anyway because somehow fine grit has got onto the paint and stuck there )

Went to go and try and sort out the hazard warning light/button thing, go to sit in the seat and by force of habit put one hand on the sill and one on the handbrake to help lower me in........ OH BUGGER!!!

Now I have a nice coating of black hammerite on my hand, tried my best to get it off but it's not shifting.

Any ideas??

Graham

tonybav

13,012 posts

272 months

Monday 30th June 2003
quotequote all
Cut the hand off???

Graham.J

Original Poster:

5,420 posts

266 months

Monday 30th June 2003
quotequote all
Not that desperate to get it off

andymadmak

14,868 posts

277 months

Monday 30th June 2003
quotequote all
Hammerite thinners

or

Hot soap and water + Pummice stone. (Handy if you are planning a burglary in the near future, cos you won't leave any prints afterwards!)

Andy 400se

Graham.J

Original Poster:

5,420 posts

266 months

Monday 30th June 2003
quotequote all
andymadmak said:
(Handy if you are planning a burglary in the near future, cos you won't leave any prints afterwards!)


Speaking from experience there Andy

Not got any pummice stone.

Swarfega has got a bit of it off so may just keep trying that for a while.

FourWheelDrift

89,634 posts

291 months

Monday 30th June 2003
quotequote all
angle grinder?

Graham.J

Original Poster:

5,420 posts

266 months

Monday 30th June 2003
quotequote all
Wont that be a bit tricky to operate with just one hand, I normally use two

kdd

1,189 posts

258 months

Monday 30th June 2003
quotequote all
Meths, white spirit, terps (sp?) shoud all do it... hammerite thinners will probably be best.

don't hold yer lit cigarette with that hand for while though....

Graham.J

Original Poster:

5,420 posts

266 months

Monday 30th June 2003
quotequote all
Ah white spirit, forgot about that, will go and see if there's any in the garage.

Cheers!!!

tonybav

13,012 posts

272 months

Monday 30th June 2003
quotequote all
Blow torch and one of those paint scrapper things should sort it.

ATG

21,357 posts

279 months

Monday 30th June 2003
quotequote all
white spirit might shift it, but think you'll really need cellulose thinners, (probably what is in Hammerite's own thinner stuff). You'll need that to clean the brush too.

Yellabelly

2,258 posts

260 months

Monday 30th June 2003
quotequote all
Graham,
Try mixing sugar with the swarfega or with washing up liquid (ie Sugar Soap) it tends to work well.
or you could let it wear off (I'm sure there is a nob joke in this post for Podie but b-ggered if I can see it)

Graham.J

Original Poster:

5,420 posts

266 months

Monday 30th June 2003
quotequote all
Bu**ger, don't have any white spirit, Dad must've pinched it for something.

I've been wondering why the white spirit hasn't been shifting the hammerite from the brush, will go and get some thinner stuff when one of the parents gets in from work.

Cheers guys

Graham

tonybav

13,012 posts

272 months

Monday 30th June 2003
quotequote all
Graham what are you going to use to cleam the Hammerite off of your keyboard??

Graham.J

Original Poster:

5,420 posts

266 months

Monday 30th June 2003
quotequote all
Will give the sugar mix a go - brown or white??

tonybav - io dummop. cajnt see anty of the siodding krys

yertis

18,677 posts

273 months

Monday 30th June 2003
quotequote all
Speaking from experience none of the solvents mentioned above will remove Hammerite very well, and in any case it's unwise to use them on your skin (BTDT says Mr Dermatitis). Hammerite's own brush cleaner is the only stuff of any use in removing Hammerite and I'd DEFINATELY not use that on my skin.

Best use the pummice stone route or one of those things made our of net curtain type stuff that old ladies make.

Fatboy

8,089 posts

279 months

Monday 30th June 2003
quotequote all
White spirit won't really work too well (voice of experience ) what you need is acetone - will dissolve just about any paint/resin - try nail varnish remover, that's usuallu just acetone with a bit of perfume.

stedale

1,124 posts

272 months

Monday 30th June 2003
quotequote all
Bu66er me is that stuff hard to shift!! Had my first experience with it the other day when I was painting some (ahem) shed hinges. Job done I went to clean the brush, white spirit? er no paint still on the brush water? some is coming off, hmm what about I agitate it with my hand...


It just got messier after that point and I decided to dump the paint brush and managed to remove the paint from hands with a nail brush.

Still traces of it around the sink though!

Steve.

deltaf

6,806 posts

260 months

Monday 30th June 2003
quotequote all
A blunt stanley knife blade can be used as a makeshift scraper to remove the accesible stuff on fingers etc...dont use a new one unless you want to paint the room a nice crimson color.
Usually swarfega with the little beads in it will shift it, but itll still take a couple of goes with a nail brush.

Tabs

996 posts

279 months

Monday 30th June 2003
quotequote all
Saw the topic title and thought,'What's the Queen using Hammerite on'