Impreza Steering Rack Brackets

Impreza Steering Rack Brackets

Author
Discussion

jeboa

Original Poster:

541 posts

267 months

Friday 14th September 2012
quotequote all
I have a steering rack from an Impreza WRX STI (1995) which I'll be fitting to a TVR Griffith to convert to power steering.

The rack is in good condition, but has no mounting brackets. Does anyone know what the part numbers for these brackets would be (or may have some spares lying about they'll swap for beer-tokens?)

There are different brackets on the rack - a round one, and a square one (photos below). Any help greatly appreciated!






ScoobieWRX

4,863 posts

232 months

Friday 14th September 2012
quotequote all
If you get stuck Grade A Subaru in Chesterfield are a dedicated Subaru breaker and i've no doubt they have many V1/V2 classic parts ready to ship and should have what you need in stock.

Give them a shout, they are very good.

jeboa

Original Poster:

541 posts

267 months

Friday 14th September 2012
quotequote all
Thank you. Found a useful online parts cat. in the end:

http://opposedforces.com/parts/impreza/en_g10/type...

Parts numbers 34120AA010 and 34120AA000

Will see if I can get hold of some new ones from a local dealer.

ScoobieWRX

4,863 posts

232 months

Friday 14th September 2012
quotequote all
Local Subaru dealer may be expensive.

I've noticed lately that prices have sky rocketed for parts that should be relatively inexpensive everywhere else.

Even the parts person in my local dealer can't understand why the group that brings them in is charging so much. The dealers make very little on parts these days, it's all about the labour charge.

You'll be wise to stick to an after market seller that sells just parts, not a tuner, and will be anything from 30%-50% cheaper than a main dealer for genuine Subaru parts.