Discussion
Not sure where it comes from (the power-fold mirror switches are Ford, mirrors might be too but don't know which model).
You can buy the of the mirror individually from Lotus though and as it's a current model the pricing isn't bad if you know which part is the problem. Most expensive bit is about £40.
https://www.deroure.com/diagrams.asp?TBL=1848&...
You can buy the of the mirror individually from Lotus though and as it's a current model the pricing isn't bad if you know which part is the problem. Most expensive bit is about £40.
https://www.deroure.com/diagrams.asp?TBL=1848&...
Has been documented a few times on here SELOC http://wiki.seloc.org/a/Power-fold_Mirrors and lotus talk
If you push the inside edge of the mirror glass as far is it goes the outer leading edge will protrude enough for you to get a grip of it. You then need to pull the glass towards you and out. Just reverse the process to get it back in.
Once the glass is out you'll see a screw that tightens the clamp around the rotator. Hopefully adjusting that should solve your problem.
Once the glass is out you'll see a screw that tightens the clamp around the rotator. Hopefully adjusting that should solve your problem.
Gassing Station | Evora | Top of Page | What's New | My Stuff