Confused about thermostats???
Discussion
I have the following in my house:
A temperature thermostat to adjust temperature in the hallway
A control box in the kitchen - can program hot water and heating to turn on / off and set periods of heat / hot water.
The issue i have is that the hallway gets warm alot sooner than other rooms due to close proximity to the kitchen. Therefore, the hallway and kitchen are warm, but bedrooms can be cooler.
Can i replace the hallway thermostat with a wireless one, putting the transmitter in a bedroom or landing in order that the heating will be on until that area is up to temperature? Seems daft that half the house is hot and the other cold.
A temperature thermostat to adjust temperature in the hallway
A control box in the kitchen - can program hot water and heating to turn on / off and set periods of heat / hot water.
The issue i have is that the hallway gets warm alot sooner than other rooms due to close proximity to the kitchen. Therefore, the hallway and kitchen are warm, but bedrooms can be cooler.
Can i replace the hallway thermostat with a wireless one, putting the transmitter in a bedroom or landing in order that the heating will be on until that area is up to temperature? Seems daft that half the house is hot and the other cold.
ferg said:
The room thermostat is positioned in the room with most air changes. Normally the hall as the front door is there. It sounds like your hall radiator isn't balanced properly with the rest of the system. It should be adjusted so that it heats up last.
Hall doesn't have a radiator - that's part of the problem.Anyone any idea's why the
http://www.lphs.co.uk/popup_image.php?pID=319
system is a pain, fairly frequently the radio signal seems to be lost between the room thermostat and boiler, pain esp when it happens in the night and you wake up to a freezing house.
Sometimes i just take it off the wall and walk nearer bolier and it fires up, other times have to press the buttons in under the batteries to reset it
.
http://www.lphs.co.uk/popup_image.php?pID=319
system is a pain, fairly frequently the radio signal seems to be lost between the room thermostat and boiler, pain esp when it happens in the night and you wake up to a freezing house.
Sometimes i just take it off the wall and walk nearer bolier and it fires up, other times have to press the buttons in under the batteries to reset it
.broken biscuit said:
I have the following in my house:
A temperature thermostat to adjust temperature in the hallway
A control box in the kitchen - can program hot water and heating to turn on / off and set periods of heat / hot water.
The issue i have is that the hallway gets warm alot sooner than other rooms due to close proximity to the kitchen. Therefore, the hallway and kitchen are warm, but bedrooms can be cooler.
Can i replace the hallway thermostat with a wireless one, putting the transmitter in a bedroom or landing in order that the heating will be on until that area is up to temperature? Seems daft that half the house is hot and the other cold.
I had a similar problem, in that the old hallway stat had a 2 degree switch period, and by the time the hall had dropped off two degrees, the living room was distinctly chilly.A temperature thermostat to adjust temperature in the hallway
A control box in the kitchen - can program hot water and heating to turn on / off and set periods of heat / hot water.
The issue i have is that the hallway gets warm alot sooner than other rooms due to close proximity to the kitchen. Therefore, the hallway and kitchen are warm, but bedrooms can be cooler.
Can i replace the hallway thermostat with a wireless one, putting the transmitter in a bedroom or landing in order that the heating will be on until that area is up to temperature? Seems daft that half the house is hot and the other cold.
I relocated the stat in the living room and changed it for a programmable one, opened up the radiator thermostat in that room and all was fine - nearly.
I've since realised that I needed to throttle down the rad in the living room as it was coming up to temp too quickly compared with the rest of the house, so I've reduced the flow via the lockshield valve. Also the hall was just wasting heat, so I've almost completely shut off the rad there (it hasn't a thermo valve as it was the driver for the original stat position)
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff






