Made4Trade bottle trap specs

[gotoPzero]

Does anyone know where I can find the dimensions / specs for this bottle trap?

https://www.toolstation.com/made4trade-bottle-trap...

I think I already have this trap and its leaking from the base (looks like corrosion) and I just want to like for like swap it for now as I am going to be ripping it all out at some point.

But I cant find the dims to check if its the right item (was here when we bought the house)

[B'stard Child]

Can you find one the same on screwfix their specs normally have drawings with dimensions

[gotoPzero]

B'stard Child said:

Can you find one the same on screwfix their specs normally have drawings with dimensions

Nope seems to be tool station only and I cant find the company online either.

[JoshSm]

Looks like one of the generics. They're adjustable up/down and can be trimmed if you need them shorter, so as long as it's the right basin attachment and outlet size it should fit.

Assume you'll swap the whole thing as that's not really any more effort than trying to replace bits?

[gotoPzero]

I just wanted to unscrew the bottle part and attach to the existing pipe work.
I dont want to disturb anything else especially at this time of year as who knows what can of worms I might open as the waste vanishes into the wall and the sink waste fitting is virtually impossible to get too due to the way its been installed so the sink would need to come off the counter, which again is a can of worms I dont want.

This is made worse as its a twin sink set up so I have 2. One of the traps is currently leaking the other is showing signs that it might go in the same spot so again I dont want to have to do everything twice just replace the bit thats leaking IYSWIM.

I know you probably didnt need to know all that!

[anonymous-user]

I’d just buy one, open it carefully to compare
Easy to return if different..