SKY + How do I connect a second TV?
Discussion
I have just had Sky + fitted, how do I connect a second TV and get it working?
Before they fitted the new system the TV upstairs worked fine with a magic eye fitted…
Now I can’t get the remote to work the TV upstairs.
Any idea guys?
Do you have to enable the system to recognize a second TV? I have the upstairs TV connected to the SKY box… it just don’t work
Cable into the RF2 port
Then hit Services, 4, 0, 1, Enter
RF Outlets
RF Outlet Power (or similar) ensure that is on.
Installer should have done it really.
If its a HD box I'm not sure if the standard remotes control them over a magic eye. They certainly dont through the front panel as the instruction set is different.
Then hit Services, 4, 0, 1, Enter
RF Outlets
RF Outlet Power (or similar) ensure that is on.
Installer should have done it really.
If its a HD box I'm not sure if the standard remotes control them over a magic eye. They certainly dont through the front panel as the instruction set is different.
Plotloss said:
Cable into the RF2 port
Then hit Services, 4, 0, 1, Enter
RF Outlets
RF Outlet Power (or similar) ensure that is on.
Installer should have done it really.
If its a HD box I'm not sure if the standard remotes control them over a magic eye. They certainly dont through the front panel as the instruction set is different.
Tried that, Ok until i get to 0, there is no 0 option and even if i press 0 nothing happens...Then hit Services, 4, 0, 1, Enter
RF Outlets
RF Outlet Power (or similar) ensure that is on.
Installer should have done it really.
If its a HD box I'm not sure if the standard remotes control them over a magic eye. They certainly dont through the front panel as the instruction set is different.
Any other ideas guys?
SS2. said:
buzzer said:
Tried that, Ok until i get to 0, there is no 0 option and even if i press 0 nothing happens...
Press the keys (Services, 4, 0, 1, Select) anyway - even if you think nothing is happening, it will Edited by SS2. on Tuesday 28th July 21:50
any other suggestions guys?
buzzer said:
Can you explain in simple terms what I need to do…?
Go back to the installer menu on the Sky box (Services > 4 > 0 > 1 > Select), go to RF Outlets and confirm the RF channel number and check that the RF Power Supply is set to ON.If the RF channel on the Sky box is set to 38 (say), then whichever channel on the TV you want to watch Sky will need to be tuned to channel 38 (ie the same as the Sky box).
SS2. said:
buzzer said:
Can you explain in simple terms what I need to do…?
Go back to the installer menu on the Sky box (Services > 4 > 0 > 1 > Select), go to RF Outlets and confirm the RF channel number and check that the RF Power Supply is set to ON.If the RF channel on the Sky box is set to 38 (say), then whichever channel on the TV you want to watch Sky will need to be tuned to channel 38 (ie the same as the Sky box).
miniman said:
You need to do this if you cannot see a picture on the other TV. If you can see a picture but the eye doesn't work, you don't need to fiddle with the RF Channel settings.
Absolutely.I was assuming [probably incorrectly] that the upstairs TV was not showing a picture..
Buzzer said:
I have the upstairs TV connected to the SKY box… it just don’t work..
Worth unscrewing the RF plugs at either end and checking there is no stray braiding from the coax that is making a 'rogue' contact as the Magic Eyes are very sensitive to this (also always make sure the RF2 out is always turned off when plugging and unplugging as the magic eyes 'blow' ridiculously easily)
focusboy said:
as plotless said, but a normal remote will not work sky +, has to be a sky + remote even through the magic eye,
garry
According to an eBook I havegarry
To reprogram the Sky remote to control the Sky+ box.
The sequence is:
- TV
- Hold Blue + select until LED falshes twice
- 2
- select
- Sky
To revert back, enter the sequence again but press the zero button instead of "2".
I've not got Sky+ so cannot say whether it works or not.
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff