brake options
Author
Discussion

tommyRS4

Original Poster:

58 posts

225 months

Friday 11th September 2009
quotequote all
Hi Guys am progressing well with the build now and am wondering about options for brakes. What have people on here used and whats your experiences with them?
any ideas greatly received Thanks.

Stig

11,823 posts

313 months

Friday 11th September 2009
quotequote all
AP

HTH wink

Paul.B

3,949 posts

293 months

Friday 11th September 2009
quotequote all
AP +1

Go on! You know you want too.

Steve_D

13,802 posts

287 months

Friday 11th September 2009
quotequote all
AP

Steve

GTRCLIVE

4,193 posts

312 months

Friday 11th September 2009
quotequote all
Toyota GT4 calipers with TRD Pads and High Spec 333mm Disc's....much more Feel than AP & DS2500 Pads....
Yes AP are no doubt better for Hard track days, but not so nice for normal day to day use....

LuckyP

6,243 posts

254 months

Friday 11th September 2009
quotequote all
AP

15,000 miles on one set of discs, two sets of pads - The Factory supplied Federo ? Ferero??

Hauls the car up amazingly quickly, and gave me all the feedback I wanted.

I'd say you want no less, and need no more. A very good option.

Like all things that you have to set up - it's the adjustment (of the balance bar) that is key. Get that wrong and the brakes will feel shocking at best and dangerous at worst.

Loads on here and from the factory about how to adjust 'em right.

Enjoy.

Pete

ROWDYRENAULT

1,294 posts

243 months

Friday 11th September 2009
quotequote all
AP. GREAT BRAKES. lEE

GTWayne

4,595 posts

246 months

Friday 11th September 2009
quotequote all
With every one on here singing praises for the AP setup, you would be mad to try anything else, but on the other hand, everyone loves a pioneer wink

Mjpmark

746 posts

213 months

Friday 11th September 2009
quotequote all
Mr Schwartz offers a BAER Braking system. According to HIS site they are an upgrade over the AP. I opted for AP though.

Gulf -LS2

1,922 posts

233 months

Friday 11th September 2009
quotequote all
some nice carbon ones would be more suited, they do some nice carbon jobbies on the new Corvette dont they Wayne??

GTWayne

4,595 posts

246 months

Friday 11th September 2009
quotequote all
Gulf -LS2 said:
...dont they Wayne??...
confused ?


738 driver

1,202 posts

222 months

Friday 11th September 2009
quotequote all
...................bet they cause serious dust!!!!rofl

jschwartz

836 posts

287 months

Monday 14th September 2009
quotequote all
The AP's worked great. But with 1000hp, I now have 14" Baer 6s monoblocks.

deadscoob

2,265 posts

289 months

Monday 14th September 2009
quotequote all
Baer is not very well represented over here, but presumably 14" APs would do an equally effective job if you really needed an upgrade?

tommyRS4

Original Poster:

58 posts

225 months

Monday 14th September 2009
quotequote all
Thanks for all the ideas guys !! AP seem to get most peoples vote. Do the 14" discs and calipers fit ok under 18" wheels or do you need to go to 19" wheels ?

Steve_D

13,802 posts

287 months

Monday 14th September 2009
quotequote all
tommyRS4 said:
Thanks for all the ideas guys !! AP seem to get most peoples vote. Do the 14" discs and calipers fit ok under 18" wheels or do you need to go to 19" wheels ?
As Jeff said he fitted bigger because he is running over 1000hp. Unless you are doing the same I would stick with the well tried and tested factory AP setup.
Stop from 100mph in 3.8 seconds should 'suit you sir'.

You will give yourself a world of grief trying to spec 19" wheels to fit in the arches.

Steve

tommyRS4

Original Poster:

58 posts

225 months

Monday 14th September 2009
quotequote all
Cheers steve just out of interest how many people on here run 19" wheels ?

GTWayne

4,595 posts

246 months

Monday 14th September 2009
quotequote all
I don't know of any owners running 19" rims but it may be worth bearing in mind that even the 'standard' 18"'s are larger than the suspension was designed to use yes

andygtt

8,345 posts

293 months

Monday 14th September 2009
quotequote all
19s would ruin the handling... If I was to build another Ultima Id go with 17s as even upgrading to the std 18s ruined the handling and dynamics on my car.

tommyRS4

Original Poster:

58 posts

225 months

Monday 14th September 2009
quotequote all
cheers guys looks like 18,s then + AP,s