Rear clip gas struts
Rear clip gas struts
Author
Discussion

Davrianman

Original Poster:

487 posts

293 months

Monday 25th June 2007
quotequote all
Hi,

Does anyone have the dimensions of the rear gas struts (just body length). Is it possible to use a slightly higher/longer lift or does the rear of the clip hit the ground?

Using 2 gas struts on the front clip to replace the over centre lock. Worked all the geometry out in CAD so should work (will post a pick if it does!!)

Getting nearer all the time!

Cheers,

Mart

dilley

205 posts

233 months

Monday 25th June 2007
quotequote all
I think you will find it will hit the ground or your back tyres.

USAGTRMAN

263 posts

289 months

Tuesday 26th June 2007
quotequote all
Mart:

Check out this thread http://www.pistonheads.com/gassing/topic.asp?h=0&t=268191&hw=+struts 

Keep us posted on your front end strut mods.

Brad Z

Steve_D

13,802 posts

287 months

Tuesday 26th June 2007
quotequote all
The mount position for the strut on the chassis is pretty much a given.
The mounting point on the clip is just where you choose to drill the hole so provided the strut you use is not grossly different in size I don't see why it could not be accommodated.

Steve

Graham-P

1,548 posts

275 months

Tuesday 26th June 2007
quotequote all
As Dilley says, the bottom of the clip will rub against the tyres (more), but the other consideration is SVA, they require the rear clip to be raised with lights and hazzards on, as these must be visible with the clip raised.

Davrianman

Original Poster:

487 posts

293 months

Wednesday 27th June 2007
quotequote all
Thanks for the info chaps.

Can anyone tell me the body length of the strut... I have a couple here, but not sure if the would fit....

Thanks!

Mart

Graham-P

1,548 posts

275 months

Wednesday 27th June 2007
quotequote all
Davrianman said:
Thanks for the info chaps.

Can anyone tell me the body length of the strut... I have a couple here, but not sure if the would fit....

Thanks!

Mart
The length of black body of the strut is 21cm.

Steve_D

13,802 posts

287 months

Wednesday 27th June 2007
quotequote all
So I thought I'll do the decent thing and measure them.
Seemed easier to pop one off and measure it on the bench.
I now know exactly what size they are, make & model and that I need a pair as both mine are fcuked......bugger.

Extended length 398.
Body 213.
Stroke 150.
Strength 135N

Will get a price tomorrow.

Steve

Davrianman

Original Poster:

487 posts

293 months

Monday 2nd July 2007
quotequote all
Try www.strutsdirect.co.uk

Bought my fronts from them. Excellent service, and they are adjustable too so you can alter the load.

Cheers

Mart