Boxing and insulating the air intake; Is it worth it?
Boxing and insulating the air intake; Is it worth it?
Author
Discussion

GTWayne

Original Poster:

4,595 posts

246 months

Thursday 7th September 2006
quotequote all
I am looking to box around the inlet stacks on the Kinsler and insulate/duct right up to the scoop to try and get the inducted air as cool as possible. Anyone here done this and what did you find? Any data or input please.

gtrclive

4,193 posts

312 months

Thursday 7th September 2006
quotequote all
Only if some else does it.....

GTWayne

Original Poster:

4,595 posts

246 months

Thursday 7th September 2006
quotequote all
Can't afford it.

steve_d

13,802 posts

287 months

Thursday 7th September 2006
quotequote all
If you mean the scoop in top of the clip I would suspect it does not have sufficient area for the amount of suck that engine will be pulling.

Steve

m3desmo

582 posts

242 months

Thursday 7th September 2006
quotequote all
Since when are you put off doing something over something as insignificant as cost! In your own words - 'In for a penny, in for a pound'

GTWayne

Original Poster:

4,595 posts

246 months

Thursday 7th September 2006
quotequote all
O.K. smart arse, don't WANT to afford it then (also I suppose I really should do something on the car myself).

m3desmo

582 posts

242 months

Thursday 7th September 2006
quotequote all
That's no way to talk to an AMIGO! bandit

Still I suppose if you made it you could treat it like a 'topping-out' ceremony!!

pb3

1,064 posts

275 months

Friday 8th September 2006
quotequote all
Yes I have done it. And yes it is worth it.

I have a few pics on my EFI website http://ultima-efi.mysite.wanadoo-memb see under the "Fuel & Air Part II" section.

steve_d - what makes you say that, all you need to compare is the intake surface area to the area of the scoop opening and it is large enough (at least for my setup plus some).

usagtrman

263 posts

289 months

Friday 8th September 2006
quotequote all
Wayne:

I have the Reverie intake on top of my Holley Commander 950 EFI system. No data but it works........



There's a piece on the rear bodywork that mates and closes the system off.

Brad Z

Edited by usagtrman on Friday 8th September 14:11

GTRene

22,413 posts

253 months

Friday 8th September 2006
quotequote all
That does look gorgieus job doneyes
GTRene

steve_d

13,802 posts

287 months

Friday 8th September 2006
quotequote all
pb3 said:
.....steve_d - what makes you say that, all you need to compare is the intake surface area to the area of the scoop opening and it is large enough (at least for my setup plus some).


In my 'minds eye' I was comparing the total of all those Kinsler stubs and it added up to more surface area than the scoop. May well be wrong but would want to do the calcs before boxing it in and not letting air in from anywhere else.

Steve

crafty

2,291 posts

266 months

Saturday 9th September 2006
quotequote all
Put a turbo on the roof to blow air in.

GTWayne

Original Poster:

4,595 posts

246 months

Saturday 9th September 2006
quotequote all
I am what is known as follicly challenged and to that end do not wish to install a hairdryer in the GTW.

crafty

2,291 posts

266 months

Saturday 9th September 2006
quotequote all
You cant spell either Wayne.... its spelt "phallically challenged"

GTWayne

Original Poster:

4,595 posts

246 months

Saturday 9th September 2006
quotequote all
Don't be such a dick head