weber linkage kit photos
Discussion
Hi
I have a very unusual linkage on my Piper GTT which runs a 1600 Xflow. As you look at the webbers straight on, the accelerator cable comes in from the front and runs over a wheel which is monuted between the carbs with a type of leg that comes out to connect into the linkage of the back carb and in turn that is connected to the front carb. Sounds a bit fiddly but it works very well as I also suffered from lack of space (bonnet very close to top of carbs and dizzy / fuel pump below. Might take a bit of thought but im sure you will be able to construct something to do the job with the space available.
I have a very unusual linkage on my Piper GTT which runs a 1600 Xflow. As you look at the webbers straight on, the accelerator cable comes in from the front and runs over a wheel which is monuted between the carbs with a type of leg that comes out to connect into the linkage of the back carb and in turn that is connected to the front carb. Sounds a bit fiddly but it works very well as I also suffered from lack of space (bonnet very close to top of carbs and dizzy / fuel pump below. Might take a bit of thought but im sure you will be able to construct something to do the job with the space available.
Gassing Station | UK Club Motorsport | Top of Page | What's New | My Stuff