Media blasting in Dubai
Discussion
6th Gear said:
Great, thanksshirt said:
just the one? can prob get that done for you FOC if you can leave it with me a few days.
Yes, just the one.If you could try that would be appreciated, has a black finish that should come off pretty easily.
I just need to remove the paint and find a 1.5mm hex driver to take the sole plate off.
Will let you know once I do those steps, cheers!
powdercoating looks best and is more durable, but you need to bear in mind that it is high build so any tightly tolerance parts night not fit so well afterwards.
painting a frame can be difficult as you get overspray everywhere. for a bike frame it may not be such a problem. bonus is that any scrapes can be touched up good as new.
for coating, there's a good place on al marabea street. turn right after gargash mercedes/before tiems square, its on the right just after robbies motorsport. whilst you're there, pop in and ask robbie where to get anodising done, he will probably know.
painting a frame can be difficult as you get overspray everywhere. for a bike frame it may not be such a problem. bonus is that any scrapes can be touched up good as new.
for coating, there's a good place on al marabea street. turn right after gargash mercedes/before tiems square, its on the right just after robbies motorsport. whilst you're there, pop in and ask robbie where to get anodising done, he will probably know.
Gassing Station | Middle East | Top of Page | What's New | My Stuff