Raising Ford Focus suspension 60-70mm??

Raising Ford Focus suspension 60-70mm??

Author
Discussion

robotvillage

Original Poster:

71 posts

231 months

Tuesday 2nd December 2008
quotequote all
Hi All, weird request I know but is it possible to raise the suspension on a Ford Focus and what would the maximinum be? Where there's a will and all that but I was wondering if anyone has done it or could point me in the direction of someone who has.. Can you buy an off the shelf kit? Any suggestions would be greatly appreciated.. Posted this in ford earlier so apologies if you've seen it twice!!

Sixpackpert

4,703 posts

221 months

Tuesday 2nd December 2008
quotequote all
Okay, I have to ask, why?

robotvillage

Original Poster:

71 posts

231 months

Tuesday 2nd December 2008
quotequote all
Why, I'd rather not say yet until I've found a response for the question above!! It may seem a little weird but will be good in the end!! CHeers...

normalbloke

7,712 posts

226 months

Tuesday 2nd December 2008
quotequote all
I suspect you will run out of travel with the criveshafts/CVs and or run out of ball joint travel at full extension.They then snap.

JimexPL

1,448 posts

219 months

Tuesday 2nd December 2008
quotequote all
I expect that 30-40mm is probably possible with different springs.

I hired a focus once in Iceland that rode noticeably higher than the UK version.
It was a left hooker saloon with a cheap looking dash - maybe a US derivative?

Quite a few manufacturers run higher springs for poorly surfaced countries, but as mentioned before I expect that 60-70mm would stretch the cv joints etc too much and fairly expensive fabrication would be involved.

Taller profile tyres could solve your problem. Visually at least a focus has plenty of space in the arches so a larger tyre could give you the rest of the lift. (but also raise your gearing etc.....)

SystemParanoia

14,343 posts

205 months

Tuesday 2nd December 2008
quotequote all
fit some 1" spacers front and rear?

robotvillage

Original Poster:

71 posts

231 months

Tuesday 2nd December 2008
quotequote all
Ah, thanks for that, hadn't thought it would run out of travel that soon but may try and find some other spring as mentioned.. nice one, thanks all...

pugwash4x4

7,558 posts

228 months

Wednesday 3rd December 2008
quotequote all
find a rally specific forum. Pretty sure that the rally africa suspension setup for WRC focuses pushes the suspension right up.

normalbloke

7,712 posts

226 months

Wednesday 3rd December 2008
quotequote all
pugwash4x4 said:
find a rally specific forum. Pretty sure that the rally africa suspension setup for WRC focuses pushes the suspension right up.
And how similar do you think a WRC Focus drivetrain/suspension set up is to a run of the Focus?......Mind,i suppose it has 4 wheels...

pugwash4x4

7,558 posts

228 months

Thursday 4th December 2008
quotequote all
you may be surprised about that- chap who you've met at the 7S event has 2 rally cars a focus WRC and a fiesta super 1600- parts are surprisingly interchangeable- the rear of the super1600 uses a bog standard rear suspension frame!

not saying that the focus stuff is instantly boltable, but ireckon there'll be guys running in group n or lower that start with RS focus's and use them as a base to upgrade from.

MRDIITD5

53 posts

197 months

Friday 5th December 2008
quotequote all
Those big magnets that they use at the scrap yard to pick cars up would show how far the suspension would travel when the focus was picked up. The best place for the aforementioned focus would then be in the crusher smile

Beyond Rational

3,527 posts

222 months

Monday 5th January 2009
quotequote all
Sixpackpert said:
Okay, I have to ask, why?
I am wondering the same thing?