Big brake conversion - where do I get the last bolt from
Discussion
I've nearly finished replacing my little weedy brakes on the LT1 camaro with some nice big Corvette ones
However I need a pair of the bolts that connect the brake pipe banjo into the caliper. Oddly enough its an metric bolt/thread (calipers are made in Oz), so American auto parts in Redhill didn't have any.
I'm sure I can get from from the US, but who might keep some more locally.
However I need a pair of the bolts that connect the brake pipe banjo into the caliper. Oddly enough its an metric bolt/thread (calipers are made in Oz), so American auto parts in Redhill didn't have any.
I'm sure I can get from from the US, but who might keep some more locally.
Edited by balls-out on Sunday 16th January 13:59
Hi mate,these guys may have them if not can get em real quick.
http://www.bauer-millett.com/
or.
http://www.demon-tweeks.co.uk/Motorsport/Braking/B...
http://www.corvette.co.uk/pages.php?section=cars
You could try your local vauxhall dealer,the manaro has the vette engine,may have the same brakes
as well.
Cheers
http://www.bauer-millett.com/
or.
http://www.demon-tweeks.co.uk/Motorsport/Braking/B...
http://www.corvette.co.uk/pages.php?section=cars
You could try your local vauxhall dealer,the manaro has the vette engine,may have the same brakes
as well.
Cheers
Edited by V10 BAT on Sunday 16th January 17:08
V10 BAT said:
Hi mate,these guys may have them if not can get em real quick.
http://www.bauer-millett.com/
or.
http://www.demon-tweeks.co.uk/Motorsport/Braking/B...
http://www.corvette.co.uk/pages.php?section=cars
You could try your local vauxhall dealer,the manaro has the vette engine,may have the same brakes
as well.
Cheers
Many thanks for the links. I#ll try them tmorrow.http://www.bauer-millett.com/
or.
http://www.demon-tweeks.co.uk/Motorsport/Braking/B...
http://www.corvette.co.uk/pages.php?section=cars
You could try your local vauxhall dealer,the manaro has the vette engine,may have the same brakes
as well.
Cheers
Edited by V10 BAT on Sunday 16th January 17:08
By a strange coincidenceI do actually have a holden on the drive, I hadn't through of nicking bits of that. I don't want start pulling its brakes apart or that'll be 2 cars that can't stop.
V10 BAT said:
Hi mate,these guys may have them if not can get em real quick.
http://www.bauer-millett.com/
or.
http://www.demon-tweeks.co.uk/Motorsport/Braking/B...
http://www.corvette.co.uk/pages.php?section=cars
You could try your local vauxhall dealer,the manaro has the vette engine,may have the same brakes
as well.
Cheers
Thanks again,http://www.bauer-millett.com/
or.
http://www.demon-tweeks.co.uk/Motorsport/Braking/B...
http://www.corvette.co.uk/pages.php?section=cars
You could try your local vauxhall dealer,the manaro has the vette engine,may have the same brakes
as well.
Cheers
Edited by V10 BAT on Sunday 16th January 17:08
Demon Tweeks came good for me. £4 for the 2.
The Corvette specialist wanted £12 per bolt +vat
Edited by balls-out on Friday 21st January 10:48
Gassing Station | Yank Motors | Top of Page | What's New | My Stuff