Discussion
Cheers guys !
So no longer a ornament lol
Off for hopefully some sun and RnR Thursday
But will get stuck in on my return,
Finished the glass tail panel today, and a few bits and pieces, blasted and refinished,
Refurbished both rear lamps, which have come up very nicely, however both chrome surrounds are to pitted to use so I’ll have to buy reproduction items,
Would guess getting them properly rechromed
Would be far more expensive!
So no longer a ornament lol
Off for hopefully some sun and RnR Thursday
But will get stuck in on my return,
Finished the glass tail panel today, and a few bits and pieces, blasted and refinished,
Refurbished both rear lamps, which have come up very nicely, however both chrome surrounds are to pitted to use so I’ll have to buy reproduction items,
Would guess getting them properly rechromed
Would be far more expensive!
newsatten said:
Refurbished both rear lamps, which have come up very nicely, however both chrome surrounds are to pitted to use so I’ll have to buy reproduction items,
Would guess getting them properly rechromed
Would be far more expensive!
Maybe not.Would guess getting them properly rechromed
Would be far more expensive!
But, I'd choose getting originals re-chromed rather than buy poor quality repro's. The issue is finding a decent chrome platers, as getting fewer and fewer with increasing environmental legislation.
aeropilot said:
Maybe not.
But, I'd choose getting originals re-chromed rather than buy poor quality repro's. The issue is finding a decent chrome platers, as getting fewer and fewer with increasing environmental legislation.
I took some bike bits to a plater in Borough Green a few months back, if H&S or Environmental Health were to pay a visit, they'd run away screaming But, I'd choose getting originals re-chromed rather than buy poor quality repro's. The issue is finding a decent chrome platers, as getting fewer and fewer with increasing environmental legislation.
![hehe](/inc/images/hehe.gif)
-Cappo- said:
aeropilot said:
Maybe not.
But, I'd choose getting originals re-chromed rather than buy poor quality repro's. The issue is finding a decent chrome platers, as getting fewer and fewer with increasing environmental legislation.
I took some bike bits to a plater in Borough Green a few months back, if H&S or Environmental Health were to pay a visit, they'd run away screaming But, I'd choose getting originals re-chromed rather than buy poor quality repro's. The issue is finding a decent chrome platers, as getting fewer and fewer with increasing environmental legislation.
![hehe](/inc/images/hehe.gif)
I always wondered why there was no name plate or indication what they did......and that it could be a H & S 'thing'......but no, it was more of a security 'thing' being as they also did rhodium, nickel, silver and gold electroplating......presumably the ingots used for those would have some fairly significant value to 'tea leaves'?
-Cappo- said:
I took some bike bits to a plater in Borough Green a few months back, if H&S or Environmental Health were to pay a visit, they'd run away screaming ![hehe](/inc/images/hehe.gif)
What sort of prices are they now charging?![hehe](/inc/images/hehe.gif)
It’s been awhile since I last had some chroming done !
The last lot of E’ stuff was eye watering exspensive!
Hence thinking of Asian repro stuff!
I know the quality isn’t great but I just won’t have the funds to go silly,
Got to keep the costs to a reasonable level,
Plus repro stuff is delivered to the door so zero driving miles to find someone willing to take jobs on!
We’ve a local one in Ramsgate if they still trade
And there was also one near Hythe so I’ll make some enquiries shortly, before I order anything!
newsatten said:
And there was also one near Hythe so I’ll make some enquiries shortly, before I order anything!
That one in Hythe did all the polishing and re-chroming work on the '61 Caddy bumpers and grille for Wheeler Dealers show that Edd China painted that lurid met green colour.....and they do a lot of old Brit bike stuff, so should know what they are doing.The platers I mentioned certainly do vintage car and bike stuff........but here is the issue. It kinda gets out of control then as anything that needs straightening, rusting-out and needs metal/weld build-up is set to an outside specialist. I suspect a fair number of chromers operate the same way?
roscobbc said:
The platers I mentioned certainly do vintage car and bike stuff........but here is the issue. It kinda gets out of control then as anything that needs straightening, rusting-out and needs metal/weld build-up is set to an outside specialist. I suspect a fair number of chromers operate the same way?
That one in Hythe, that NaT mentioned, do all that in house, so not all chrome platers will sub out, depends on their setup I guess. Small platers most likely will sub out (are many of these left now though?)aeropilot said:
roscobbc said:
The platers I mentioned certainly do vintage car and bike stuff........but here is the issue. It kinda gets out of control then as anything that needs straightening, rusting-out and needs metal/weld build-up is set to an outside specialist. I suspect a fair number of chromers operate the same way?
That one in Hythe, that NaT mentioned, do all that in house, so not all chrome platers will sub out, depends on their setup I guess. Small platers most likely will sub out (are many of these left now though?)My issues are the pot metal mouldings have a fair few blisters that have popped and now are craters!
Funny old material but I think it can be soldered if clean enough??
There’s only 8 pieces on the car that are chrome, all small all popped!
About 700 quid to replace with repro jobbies
newsatten said:
-Cappo- said:
I took some bike bits to a plater in Borough Green a few months back, if H&S or Environmental Health were to pay a visit, they'd run away screaming ![hehe](/inc/images/hehe.gif)
What sort of prices are they now charging?![hehe](/inc/images/hehe.gif)
It’s been awhile since I last had some chroming done !
The last lot of E’ stuff was eye watering exspensive!
Hence thinking of Asian repro stuff!
I know the quality isn’t great but I just won’t have the funds to go silly,
Got to keep the costs to a reasonable level,
Plus repro stuff is delivered to the door so zero driving miles to find someone willing to take jobs on!
We’ve a local one in Ramsgate if they still trade
And there was also one near Hythe so I’ll make some enquiries shortly, before I order anything!
Hallo from a very hot and sunny Mallorca
My daughter has just sent me some pics of my V5c!!
Ok I knew it was all kosher but nice to have the actual documentation!!
![](https://forums-images.pistonheads.com/428054/202407055502927?resize=720)
There’s a fair few amazing houses here and I did see a stunning Porsche RS I’ll try a get a snap not being an aficionado but it’s looked like the old holy grail car !
My daughter has just sent me some pics of my V5c!!
Ok I knew it was all kosher but nice to have the actual documentation!!
There’s a fair few amazing houses here and I did see a stunning Porsche RS I’ll try a get a snap not being an aficionado but it’s looked like the old holy grail car !
Gassing Station | Yank Motors | Top of Page | What's New | My Stuff