Juddery Acceleration
Discussion
For a Start push the HT leads down as hard as you can onto the plugs to make sure they are pushed in correctly. And then check the coil pack end.
I had a similar problem years ago after my car had been in the garage for a service, one of the leads hadnt been engaged properly and it started to corrode, had to put a new set of leads on.
So you might need a new set of leads, also were the plugs correctly gaped before you put them in, (did you drop any of the plugs etc?)
I usually change plugs and leads together. Probably no need too but might aswell while im there.
I had a similar problem years ago after my car had been in the garage for a service, one of the leads hadnt been engaged properly and it started to corrode, had to put a new set of leads on.
So you might need a new set of leads, also were the plugs correctly gaped before you put them in, (did you drop any of the plugs etc?)
I usually change plugs and leads together. Probably no need too but might aswell while im there.
Gassing Station | Mazda MX5/Roadster/Miata | Top of Page | What's New | My Stuff