I want another track toy
Discussion
I sold my last MX5 earlier in the year but am now on the lookout for a replacement. It will be used solely on track (and getting to and from) so a mint example isn't important but all the right track bits are. Ideally I want as much of the following as possible:
adjustable dampers, poly bushed, extra braces, brake upgrade, proper roll bar, bucket seat, harness bar, harnesses.
I have been thinking of going down the s/c route too so let me know what you have!
adjustable dampers, poly bushed, extra braces, brake upgrade, proper roll bar, bucket seat, harness bar, harnesses.
I have been thinking of going down the s/c route too so let me know what you have!
91 bbr turbo, lowered and stiffened with KYB AGX, eibachs, powerflex soft bumpstops, FM uprated antiroll bars (on plybush mounts) with rose jointed drop links, 1.8 brake upgrade on axiss ultimate pads, 2.5" freeflow exhaust, decatted, cusco 4-pt roll bar and harness bar, 3" sparco twist buckle harness drivers side (2" sabelt buckle harness pass side), sparco corsa race seat drivers side, sparco rev seat pass side, both mounted directly to floor.
will come with megasquirt PnP ecu with all required bits and innovate wideband o2 sensor, 16 row oil cooler and thermostat take off plate, all big 5/8 piping instead of 1/2", also oil take off and oil filter relocation kit. also, half width dual core ali radiator to expose intercooler better. these bits are not fitted as i've not had the time, and won't have the time to do it next year.
2 sets of track wheels available, 15" mazda OEM mk2 wheels with hankook RS2, still 4mm tread, 14" lightweight bbs cross-spokes with well worn toyo R888 (probably only 1 track day left in these) - these sets will be at extra cost, negotiable.
looking for 2500 as i've seen something else for 3500 and i can only scrape together a grand.
edit, forgot comes with a rare "working" VLSD also, not fitted. tax (12 months) and MOT were both done last month
will come with megasquirt PnP ecu with all required bits and innovate wideband o2 sensor, 16 row oil cooler and thermostat take off plate, all big 5/8 piping instead of 1/2", also oil take off and oil filter relocation kit. also, half width dual core ali radiator to expose intercooler better. these bits are not fitted as i've not had the time, and won't have the time to do it next year.
2 sets of track wheels available, 15" mazda OEM mk2 wheels with hankook RS2, still 4mm tread, 14" lightweight bbs cross-spokes with well worn toyo R888 (probably only 1 track day left in these) - these sets will be at extra cost, negotiable.
looking for 2500 as i've seen something else for 3500 and i can only scrape together a grand.
edit, forgot comes with a rare "working" VLSD also, not fitted. tax (12 months) and MOT were both done last month
Edited by skinny on Friday 18th December 00:09
Gassing Station | Mazda MX5/Roadster/Miata | Top of Page | What's New | My Stuff