NC odd squeak from clutch-ish

NC odd squeak from clutch-ish

Author
Discussion

Ekona

Original Poster:

1,672 posts

209 months

Tuesday 13th September 2022
quotequote all
Hey folks, I’ve got a 2L ‘07 NC sat at just over 100k miles now and it’s developed a very odd squeak from what sounds like near the gearbox/clutch mechanism area.

At idle, out of gear, there’s a fast repetitive squeak noticeable from that area. It doesn’t change speed or tone with engine speed at all, and doesn’t get worse or better when the engine is warm. If I press the clutch pedal slightly (and I mean really slightly, not even close to the disengagement point) the sound immediately goes. Release the pedal and it’s back. When driving along you can hear it constantly too in the background.

Clutch was changed about 10k miles ago along with the slave cylinder, and there is no change to the feel or engagement of the clutch whatsoever: all feels very normal and positive. No other clunks or clangs can be heard at all.

Any thoughts? I’m stumped!

Bainbridge

195 posts

44 months

Friday 16th September 2022
quotequote all
Has this noise started since the clutch was replaced?

Ekona

Original Poster:

1,672 posts

209 months

Friday 16th September 2022
quotequote all
Yes, but about 10k miles and a year afterwards

Ekona

Original Poster:

1,672 posts

209 months

Tuesday 11th July 2023
quotequote all
Just to follow this up, and also a slight bump to see if anyone has any ideas, this noise is still there and I'm now another 10K on the clock (so 110K all in). It may have gotten fractionally louder but I'm not sure, and the gear selection/clutch engagement is still absolutely fine.

I'm starting to wonder if it's just one of those noises that older cars develop for no rhyme or reason at this point...

Nickp82

3,405 posts

100 months

Tuesday 11th July 2023
quotequote all
I reckon the Clutch release bearing is what’s making the noise. The majority of RX-8s make a sort of grinding noise when the clutch is released which can become a squeaking after the clutch is changed. It’s a bit of a pain but I don’t think it’ll cause you any issues

Ekona

Original Poster:

1,672 posts

209 months

Friday 14th July 2023
quotequote all
Nickp82 said:
I reckon the Clutch release bearing is what’s making the noise. The majority of RX-8s make a sort of grinding noise when the clutch is released which can become a squeaking after the clutch is changed. It’s a bit of a pain but I don’t think it’ll cause you any issues
Well that's good news then if that's all it is, I can live with a bit of a squeak smile Much apprciated.