NC Central locking Issue

Author
Discussion

Jambur

Original Poster:

34 posts

68 months

Friday 22nd March 2019
quotequote all
Hi guys. I've liked along time, creeping on everyone from over the fence. Have an issue that prompted me to finally join though.

The victim is a2008 prht

I was replacing the done bulb in the car, I guess I must have misaligned it, because radio and interior were dead.

Drove home, changed the fuse. Now the accessories are ok, but the car would't start. It was flashing the key symbol, and had the check engine light up.

Found a faulty fuse with a dry break. Accessories back up and running, but car wouldn't turn over. Disconnected the battery for 30 minutes. After I reconnected everything seemed ok.......

But it wasn't!

I've no central locking. Neither by remote or key.. it's the same with both of my keys (regular flip keys)

The fob works the remote boot unlock, but nothing for the doors. Locking the driver door manually, does nothing for the passenger side.

Any thoughts? I'm really at a loss here

Thanks in advance

Jambur

Original Poster:

34 posts

68 months

Friday 22nd March 2019
quotequote all
Does anyone have a wiring diagram for the central locking system? I've checked every fuse in both locations. I'm not getting anywhere at all with this....

Jambur

Original Poster:

34 posts

68 months

Friday 22nd March 2019
quotequote all
Disregard everything. I put one of the fuse back in the wrong location. Crisis agreed. Application form for idiots association sent in.