Tillett Seats in mk3

Author
Discussion

MagicalTrevor

Original Poster:

6,476 posts

236 months

Tuesday 6th March 2018
quotequote all
Thought I’d share the progress I’ve made on my seats.
As you may be aware, there aren’t very many seats that fit well and even fewer seat mounts that fit to the OEM seat fittings.

I’m in the process of developing my own mount because the commercially available ones are horrendously priced and don’t actually sit central.

So I’ve got a prototype with an adapter to get the Tillett to sit centrally.

You can see the adapters I’ve mocked up. Next step is to get them made in 3mm steel as a stop gap whilst I finalise those measurements for the final design




Plenty of room around the sides of the seat and the door & tunnel




MagicalTrevor

Original Poster:

6,476 posts

236 months

Tuesday 6th March 2018
quotequote all
I did try Sparco Grid II Seats but they sit too high for me at 6ft even though the measurements seemed to work. They’d be ok if you were upto 5’10” maybe and ideally 5’8” or shorter

MagicalTrevor

Original Poster:

6,476 posts

236 months

Tuesday 6th March 2018
quotequote all
I measured the centre line (yellow) and used the adapter to get it dead centre

drgoatboy

1,713 posts

214 months

Wednesday 5th September 2018
quotequote all
Bit of a thread resurection but did you ever get this finished? Do you sit muh lower and further back?

MagicalTrevor

Original Poster:

6,476 posts

236 months

Thursday 6th September 2018
quotequote all
Sorry, I forgot all about this thread.

Got it finished and very happy with the setup now... it’s kinda moved on quite some way!



I’ve added a second Tillett seat, this time a Carbon B5, which is designed for the Elise. Fits perfectly and is more comfortable for passengers of varying sizes.



Safety Devices half cage was added and the interior trim removed. That’s not necessary for the seats though, unless you’re really tall.



DIY trim to the rear



Test location for the Aim Solo DL, it’s back on the dash now.


MagicalTrevor

Original Poster:

6,476 posts

236 months

Thursday 6th September 2018
quotequote all
Do I sit much lower?
I had the opposite problem, I sat too low! I’ve ended up using some 10mm spacers that I had machined. 2 at the back and one at the front. I’m 6ft.

I have room behind the seat, but that’s due to the trim removal, I reckon the back of the seat would touch the trim if I had that fitted in it’s current position, but not much.

SAS Tom

3,547 posts

181 months

Thursday 6th September 2018
quotequote all
I guess this is a bit internet stalkerish but did you do a track day in this at Blyton Park a few months ago? I’m sure I recognise the car.

MagicalTrevor

Original Poster:

6,476 posts

236 months

Thursday 6th September 2018
quotequote all
First internet stalker = Winning wink

Yes, I was there :-). Which car was yours?

https://youtu.be/S2Sj1D7Sxu4
https://youtu.be/I9e_UQcu0MI

SAS Tom

3,547 posts

181 months

Thursday 6th September 2018
quotequote all
I was one of the lads in the 1 litre polo, recognised the car by the seats. Can’t be many with them in.

I’m at blyton again on Monday in my Fabia, MoT are doing a limited numbers day.

MagicalTrevor

Original Poster:

6,476 posts

236 months

Thursday 6th September 2018
quotequote all
SAS Tom said:
I was one of the lads in the 1 litre polo, recognised the car by the seats. Can’t be many with them in.

I’m at blyton again on Monday in my Fabia, MoT are doing a limited numbers day.
No, there really aren't many at all!