MX-5 NC as first car... What do I need to know?

[TNurburgring]

In a few weeks I am going to buy a NC. So, I read a lot of buying guides and did a lot of "research". I think I know enough to buy and own a NC, but it's always nice to get some tips from people that own(ed) this car.

Are there any things I should know before buying a NC?

[hornetrider]

Apart from the usual checks, just make sure you get it aligned after purchase to make sure everything is tickety boo.

[Shaw Tarse]

Suggested link at foot of page http://www.pistonheads.com/features/ph-features/ma...

[TNurburgring]

Thanks for the help, guys!

I already read that buying guide. Quite helpful, also the forum discussion around it is helpful.

[g40steve]

Look on nutz plenty of info.
If it knocks walk away.
If the oil is low do the same.

[clarki]

Make sure it's a 2.0.

[Rum Runner]

Rust on suspension and all underbody components.

[TNurburgring]

If I see a 2.0 within my budget, then I will buy it! Otherwise, it has to be a 1.8...

Is rust a big problem on NCs?

[LordJammy]

Don't assume you're the drift king and slide it into something. It's harder than it looks on the Telly.

[Sko77y]

TNurburgring said:

If I see a 2.0 within my budget, then I will buy it! Otherwise, it has to be a 1.8...

Is rust a big problem on NCs?

I'd put aside money to get it undersealed.

I know of a few 55/06 plate NC's that have needed arches touched up, due to rust appearing (mine included)

[TNurburgring]

Sko77y said:

I'd put aside money to get it undersealed.

I know of a few 55/06 plate NC's that have needed arches touched up, due to rust appearing (mine included)

Seems like I need to do that, thanks for the tip!