MK1 front bumper mouth size
Discussion
Well you can buy them pre-made. They're pretty easy to fit. I put one on my Mk 2.5.
E.g. http://www.mx5parts.co.uk/black-intake-grille-mk12...
Or to make your own:
http://ox.mx5oc.co.uk/diy.htm
E.g. http://www.mx5parts.co.uk/black-intake-grille-mk12...
Or to make your own:
http://ox.mx5oc.co.uk/diy.htm
If it's for a forced induction car you need all the cooling you can get so I wouldn't fit one of the pressed steel grilles. The woven mesh grilles are more expensive but flow a lot better.
http://www.mx5parts.co.uk/grilles-c-45_294_245.htm...
ETA: My Mk2.5 has a woven mesh grille and a TDR FMIC. They mount a lot further forward than the pressed steel ones. Not sure about the fogs though.
http://www.mx5parts.co.uk/grilles-c-45_294_245.htm...
ETA: My Mk2.5 has a woven mesh grille and a TDR FMIC. They mount a lot further forward than the pressed steel ones. Not sure about the fogs though.
Lazza i had the black one of the exact grill you mention. It wouldnt fit as the fogs occupy a lot of the mouth. I'd have to cut it up so much it would have lost any rigidity and be useless
Was thinking about a black aluminium mesh (http://www.ebay.co.uk/itm/ALUMINIUM-BLACK-MESH-GRILLE-VENT-BUMPER-MAZDA-323-626-MX-5-MIATA-RX-8-MX-3-01-B-/151394991887?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item233fd83f0f) bonded on shaped around the back of the fogs. The goal here is to protect the intercooler from stones rather then styling.
Was thinking about a black aluminium mesh (http://www.ebay.co.uk/itm/ALUMINIUM-BLACK-MESH-GRILLE-VENT-BUMPER-MAZDA-323-626-MX-5-MIATA-RX-8-MX-3-01-B-/151394991887?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item233fd83f0f) bonded on shaped around the back of the fogs. The goal here is to protect the intercooler from stones rather then styling.
Gassing Station | Mazda MX5/Roadster/Miata | Top of Page | What's New | My Stuff