Removing clutch pedal assembly on an NA
Discussion
I've asked this on nuts but not getting anywhere so....
Hit a bit of a stumbling block. I'm trying to remove pedal assembly on my NA. The dash is currently off. The steering column is off. The accelerator and brake assembly is out of the car. I've removed the nuts on the inside of the car that hold the mounting bracket to the firewall. I've removed the nut in the top plate. The clevis pin is out. I've removed one nut under the bonnet next to the master cylinder. It's all now loose but I cannot get it out and I can't work out why not. Does the master cylinder need to move maybe?
Hit a bit of a stumbling block. I'm trying to remove pedal assembly on my NA. The dash is currently off. The steering column is off. The accelerator and brake assembly is out of the car. I've removed the nuts on the inside of the car that hold the mounting bracket to the firewall. I've removed the nut in the top plate. The clevis pin is out. I've removed one nut under the bonnet next to the master cylinder. It's all now loose but I cannot get it out and I can't work out why not. Does the master cylinder need to move maybe?
Gassing Station | Mazda MX5/Roadster/Miata | Top of Page | What's New | My Stuff