Rear suspension?
Discussion
Hi
Due to a house move in may I decided to sell my 08 M3 and get something more sensible, after 4 four months of driving my daughter mini one I find the pull of M3 ownership to great, today I test drove a CSL
When driving hard and changing up with only the slightest lift it felt like the back end of the car was loose, is this normal? or are they prone to suspension wear, the car has run 40K
thanks
Due to a house move in may I decided to sell my 08 M3 and get something more sensible, after 4 four months of driving my daughter mini one I find the pull of M3 ownership to great, today I test drove a CSL
When driving hard and changing up with only the slightest lift it felt like the back end of the car was loose, is this normal? or are they prone to suspension wear, the car has run 40K
thanks
i did exactly the same 3 years ago when i bought mine. First roundabout i tried i pulled away to the right and the back hoped to the left a little
it was the Rear Trailing Arm Bushes - cheap to change and as above fit the Turner limiter kits to stop it happening again
could also be a broken rear spring, once again easily changed for circa £100
both these items are common problems
it was the Rear Trailing Arm Bushes - cheap to change and as above fit the Turner limiter kits to stop it happening again
could also be a broken rear spring, once again easily changed for circa £100
both these items are common problems
the diff is what you notice on gear changes and it is reasonably brutal in 5/6
Turner Limiter kit as follows
http://www.turnermotorsport.com/html/detail.asp?PR...
you will need new OEM bushes as well, bMW or Turner
http://www.turnermotorsport.com/html/detail.asp?PR...
if its the spring they look like this and if you have a jack can easily be changed
http://www.realoem.com/bmw/diagrams/g/i/138.png
Turner Limiter kit as follows
http://www.turnermotorsport.com/html/detail.asp?PR...
you will need new OEM bushes as well, bMW or Turner
http://www.turnermotorsport.com/html/detail.asp?PR...
if its the spring they look like this and if you have a jack can easily be changed
http://www.realoem.com/bmw/diagrams/g/i/138.png
Edited by shim on Friday 25th September 22:26
Gassing Station | CSL | Top of Page | What's New | My Stuff