New CSL ring vid...
Discussion
Hi
I am not sure of the bullet cam but I guess 480 or 520 line hi res connected to a normal DV tape camcorder with AV in for the bullet cam. I did turn the quality down 50% for the vid to keep the file size around 50mb, original 120mb, but still nice picture and sound.
rs666, not sure how to do ph stuff so I sent you email to your http://detailfinish.co.uk , nice site by the way!
I am not sure of the bullet cam but I guess 480 or 520 line hi res connected to a normal DV tape camcorder with AV in for the bullet cam. I did turn the quality down 50% for the vid to keep the file size around 50mb, original 120mb, but still nice picture and sound.
rs666, not sure how to do ph stuff so I sent you email to your http://detailfinish.co.uk , nice site by the way!
The exhausts system is standard the reason why is sounds a bit fruity is the mic is placed near the air box and the bullet cam is in the grill at the front, hard to spot ideal for the ring - thanks for the comments the CSL is a cracking car and makes the average driver like me look better. I dont think the guy in the RS was trying cos it was cold and taking a lap to get some heat into the tyres
I Bought the kit from RF Concepts for about £130 about 3 years ago and its proved pretty robust the pencil cam is made by sony and the mic comes with the kit I know this will sound a bit Heath Robinson but it works for me!! I tape the pencil cam in the grill there's room feed the cables back under the bonnet with gaffer take and the mic is about a metre from the pencil cam and it drops in micely near the air box I have it about an inch hanging down from the bonnet, then feed the cable out of the bonnet into the passenger side window then put the camera in the glove compartment, when you order the kit get the 12v adaptor to fit into the cig lighter its takes about 20 mins to do it all. Now i just fit it at home so there is no messing at the ring and the heat of the engine doesnt affect the pencil cam. a tip - put a cover over the lense of the pencil cam when not in use as its easy to get a stone chip travelling there andthe other thing is between filming unplug the 12v lead to the camera or overheats the pencil and causes condensation on the lense and it takes about an hour to clear. Do a search on google and you should be able to find the website.
Thanks for the info:
I have looked at the below website but they sell so many different cameras,I am lost....
Is yours still sold by them, or if not , which one closest resembles it? I cannot find any described as 'pencil' cameras. Is the diamaeter of the lens less than a standard bullet camera?
www.rfconcepts.co.uk/cameras.htm
Many Thanks.
I have looked at the below website but they sell so many different cameras,I am lost....
Is yours still sold by them, or if not , which one closest resembles it? I cannot find any described as 'pencil' cameras. Is the diamaeter of the lens less than a standard bullet camera?
www.rfconcepts.co.uk/cameras.htm
Many Thanks.
Hi
I've used this www.dogcamsport.co.uk/dogcampro520.htm . Less than 5 mins ti install and top picture (520 lines) sound. Also with the suction mount as part of kit only your imagination limits positions/angles etc. plus you can do the honestjohn method.
I've used this www.dogcamsport.co.uk/dogcampro520.htm . Less than 5 mins ti install and top picture (520 lines) sound. Also with the suction mount as part of kit only your imagination limits positions/angles etc. plus you can do the honestjohn method.
Edited by 3wheels3 on Wednesday 28th March 16:31
Gassing Station | CSL | Top of Page | What's New | My Stuff