Flap emergency!
Discussion
cuda said:
At the 'ring and my intake flap is not oowning at the usual 3500 rpm - why might this be and is there a quick fix I can do here or anyone here who can fix it???
Any quick replies much appreciated!!
Probably the potentiometer gone kaput, a common CSL fault. Just remove it for the moment. In fact many run without one permanently for extra lower-RPM noiseAny quick replies much appreciated!!
Actuator fail
Unplug and remove three bolts for flap and remove flap, don't loose 3 bolts in airbox.![smile](/inc/images/smile.gif)
Replace and plug in potentiometer and drive with out flap, no issues
Instructions here
http://www.cslregister.com/forum/showthread.php?t=...
Unplug and remove three bolts for flap and remove flap, don't loose 3 bolts in airbox.
![smile](/inc/images/smile.gif)
Replace and plug in potentiometer and drive with out flap, no issues
Instructions here
http://www.cslregister.com/forum/showthread.php?t=...
Thanks very much guys - just seen this as for some reason the alerts didn't come through - found a helpful mechanic called Peter in Schulstrasse in Weisemscheid (5 mins away) who plugged in a laptop but couldnt find a fault so just undid the flap motor, reversed it back on with one bolt and put the other two bolts back in. Job done - Euros 50!
Gassing Station | CSL | Top of Page | What's New | My Stuff