Custom Made Exhausts
Discussion
After searching for a lightweight, stainless, sport exhaust for the Z4M & coming up with very little, I have just found this company Exhaust System that for £544 will make one up for you, while you wait! Anybody here used or know of them?
Colin.
Colin.
Edited by Z8cookie on Thursday 27th September 11:08
While-U-wait exhausts may involve a heck of a lot of, er, waiting.
Seeing as you're in Cheshire, maybe try JP exhausts in Macc - they did my TVR stainless manifolds, and a cat-back single-silencer exhaust from scratch in a (long) morning, so might be worth a go. They supply a lot of TVR stuff, so a search on the TVR forums might bring up more opinions.
Seeing as you're in Cheshire, maybe try JP exhausts in Macc - they did my TVR stainless manifolds, and a cat-back single-silencer exhaust from scratch in a (long) morning, so might be worth a go. They supply a lot of TVR stuff, so a search on the TVR forums might bring up more opinions.
Colin,
MIJ did a bespoke system on my old 2.8 Quattro, did a great job, got rid of the twin branched Cats and brought down to a single one with tasty stainless b/box hanging across the rear (quattro stylee!)
As mentioned tho, it does involve a lot of waiting, i had it done at their old tiny premises (round the corner from their new ones) so was forced to spend the afternoon in Walsaw. Not good i can tell you...
If its for a Z4M tho there are lots of off the shelf versions to fit, I had a Tubi Rumore system on my e39 M5, not sure if they do them for yours but worth checking as will emit the best noise from a BMW V8! There are others tho.
MIJ did a bespoke system on my old 2.8 Quattro, did a great job, got rid of the twin branched Cats and brought down to a single one with tasty stainless b/box hanging across the rear (quattro stylee!)
As mentioned tho, it does involve a lot of waiting, i had it done at their old tiny premises (round the corner from their new ones) so was forced to spend the afternoon in Walsaw. Not good i can tell you...
If its for a Z4M tho there are lots of off the shelf versions to fit, I had a Tubi Rumore system on my e39 M5, not sure if they do them for yours but worth checking as will emit the best noise from a BMW V8! There are others tho.
The wife has used MIJ on her car, pretty good work, but personally I didn't like the choice of tips they offered her, to me that looked a bit OTT. IIRC she had back boxes and pipes replaced and it was about £270 (group buy on the ST Owners Forum.)
I've used Hayward and Scott and they did a fab job on the ///M. They have quite a bit of experience with BMWs. (Plus they let the V8 speak a little bit more )
http://www.youtube.com/watch?v=FJyv9cg7SVQ
I've used Hayward and Scott and they did a fab job on the ///M. They have quite a bit of experience with BMWs. (Plus they let the V8 speak a little bit more )
http://www.youtube.com/watch?v=FJyv9cg7SVQ
Seesure, i know what your saying about those MIJ tips mind, luckily they had a not to dissimilar to standard, twin rounds for mine.
Also, heres a link to my Tubi on my old M5. If they do one for yours....get one! (actually, this post is spookily very similar to Seesures above!)
http://uk.youtube.com/watch?v=WwaRehvvkIY
Also, heres a link to my Tubi on my old M5. If they do one for yours....get one! (actually, this post is spookily very similar to Seesures above!)
http://uk.youtube.com/watch?v=WwaRehvvkIY
Sixspeed has the H&S custom cat back for the Z4M, sounds lovely !
http://uk.youtube.com/watch?v=krSPw4SmR6Y
About £900 i think.
http://uk.youtube.com/watch?v=krSPw4SmR6Y
About £900 i think.
Gassing Station | M Power | Top of Page | What's New | My Stuff