M2 C - ASD lead
M2 C - ASD lead
Author
Discussion

MellowshipSlinky

Original Poster:

15,779 posts

211 months

Friday 13th December 2019
quotequote all
Have had a Milltek race system fitted and whilst it sounds better than the stock exhaust the ASD spoils it somewhat.
Now I know I can purchase the lead from the US but delivery costs is almost as much as the lead itself.
Anyone know of any other places in the UK/ EU that sell similar?

Thanks.

TuonoPants

307 posts

166 months

Saturday 14th December 2019
quotequote all
I fitted one of these (the day I got the car!) and it is worth it even with the shipping costs. Couldn't find anywhere in Europe that did them.

This is the one I have https://technicpnp.com/product/asd-bypass-harness/

MellowshipSlinky

Original Poster:

15,779 posts

211 months

Saturday 14th December 2019
quotequote all
That’s the one.
But for the same price I could buy a Wi-fi dongle and connect up to Bimmalink I guess..

I also found this and have emailed the company to see if it fits, but so far no reply..

https://www.carfeature.de/en/hifi-navigation/acces...

TuonoPants

307 posts

166 months

Saturday 14th December 2019
quotequote all
Bimmercode is worth getting for other stuff so going that route makes a lot of sense, the gain of doing the cable as well is minimal.

I did the cable, then got Bimmercode later when I wanted to make other changes.

MellowshipSlinky

Original Poster:

15,779 posts

211 months

Saturday 14th December 2019
quotequote all
So does coding out the ASD with Bimmercode work as well as or the same as using the cable?

Hammy98

887 posts

114 months

Monday 16th December 2019
quotequote all
Careful with BimmerCode especially with a wireless dongle.

A chap on babybmw ended up with a tamper dot on his speedo when the connection dropped during coding, looked like a ballache to sort out as it made it look like the car had been clocked.

TuonoPants

307 posts

166 months

Monday 16th December 2019
quotequote all
MellowshipSlinky said:
So does coding out the ASD with Bimmercode work as well as or the same as using the cable?
I've never done a comparison between the two but others have said that just doing the coding still leaves the ASD unit connected to the amp which can result in some background white noise which is most noticeable at low volumes. Apparently this is worse if you have the HK amp.

Unplugging ASD from the amp cuts all the audio so that isn't an option.