Energy Engineering Degree - Worthwhile?
Energy Engineering Degree - Worthwhile?
Author
Discussion

jambo103

Original Poster:

84 posts

168 months

Tuesday 29th January 2013
quotequote all
Contemplating whether to do a degree and the choice is between Energy, Mechanical or Electrical.

Liking the Energy one, it would be third year entry on any of the above.

Any recommendations?


NewNameNeeded

2,560 posts

254 months

Tuesday 29th January 2013
quotequote all
jambo103 said:
Contemplating whether to do a degree and the choice is between Energy, Mechanical or Electrical.

Liking the Energy one, it would be third year entry on any of the above.

Any recommendations?
What have you been studying so far to allow you to enter these degrees in the third year? Just curious. I could imagine skipping first year of my Chem Eng degree with the right equivalent skills from an alternative degree... But not jumping straight to the third year.

caterhamboy

568 posts

227 months

Tuesday 29th January 2013
quotequote all
Electrical Engineers are currently paid the most.

cerbfan

1,198 posts

256 months

Tuesday 29th January 2013
quotequote all
What do you want to do at the end of it?

If you want to go into oil and gas I'd highly recommend going to Aberdeen or Robert Gordons and get yourself on Mechanical or Oil and Gas degree course, much easier to get into the industry from there as they have a lot of links with companies. Then again the way the jobs market is up here at the moment you could get an Engineers job if you had 6 months as a domestic appliances engineer down on your CV.

der1

656 posts

167 months

Tuesday 29th January 2013
quotequote all
Starting Mechanical and offshore engineering at aberdeen in september smile


jambo103

Original Poster:

84 posts

168 months

Thursday 7th February 2013
quotequote all
NewNameNeeded said:
What have you been studying so far to allow you to enter these degrees in the third year? Just curious. I could imagine skipping first year of my Chem Eng degree with the right equivalent skills from an alternative degree... But not jumping straight to the third year.
Previously studied 240 credits on a proposed Physics degree, but chopped and changed a bit and it's pretty much a broad mix of engineering modules.

jambo103

Original Poster:

84 posts

168 months

Thursday 7th February 2013
quotequote all
cerbfan said:
What do you want to do at the end of it?

If you want to go into oil and gas I'd highly recommend going to Aberdeen or Robert Gordons and get yourself on Mechanical or Oil and Gas degree course, much easier to get into the industry from there as they have a lot of links with companies. Then again the way the jobs market is up here at the moment you could get an Engineers job if you had 6 months as a domestic appliances engineer down on your CV.
Everything seems to be pointing towards the renewables, hence fancying the Energy sector.

cerbfan

1,198 posts

256 months

Thursday 7th February 2013
quotequote all
jambo103 said:
cerbfan said:
What do you want to do at the end of it?

If you want to go into oil and gas I'd highly recommend going to Aberdeen or Robert Gordons and get yourself on Mechanical or Oil and Gas degree course, much easier to get into the industry from there as they have a lot of links with companies. Then again the way the jobs market is up here at the moment you could get an Engineers job if you had 6 months as a domestic appliances engineer down on your CV.
Everything seems to be pointing towards the renewables, hence fancying the Energy sector.
I'd disagree, oil and gas is the way to go, renewables are still in there infancy, the money is not as good as the work is still being done by civils companies. Technip are finding it very hard to break into the offshore wind market. The oil and gas sector is booming just now and has a huge shortage of people.

a311

6,393 posts

206 months

Saturday 9th February 2013
quotequote all
IMO I'd stick to main disciplines if I were you, Chemical, Electrical or Mechanical. Also look to see if the courses you're considering getting chartered at some point have a look to see if the degree is accredited with the professional body.

I've always thought Chemical Engineers are the highest paid. If you like physics you may consider a degree that Leeds Uni are offering in Chemical & Nuclear Engineering.

FastNReliable

308 posts

208 months

Sunday 10th February 2013
quotequote all
I would also advise sticking with the main routes. A background in Mech , Elec or Chem will provide a good basis for moving into any sector you wish.

Mattt

16,664 posts

247 months

Monday 11th February 2013
quotequote all
caterhamboy said:
Electrical Engineers are currently paid the most.
Huge shortage of Electrical Engineers here in Australia too.

By Electrical Engineers I don't mean Electricians, Fitters or Technicians.

jambo103

Original Poster:

84 posts

168 months

Friday 13th December 2013
quotequote all
Opted for the Energy Engineering after all... half way through and so far so good.