Rollcage camera mount for Nokia Lumia

Rollcage camera mount for Nokia Lumia

Author
Discussion

smiles1

Original Poster:

543 posts

228 months

Saturday 30th July 2016
quotequote all
Can anybody recomend a good fixed rollcage (or other) mount for a Nokia Lumia?

Most seem to be either suction mounts or advertised for pushbike handle bars and I'm not sure they are wide enough for a rollcage.

Thanks

anonymous-user

60 months

Saturday 30th July 2016
quotequote all
If you can I'd look at getting something to hold the Nokia which is compatible with GoPro mounts and then use a GoPro mount to attach it to the roll bar - simply because it's become a generic standard and there are tons of cheap and decent kits out there.

smiles1

Original Poster:

543 posts

228 months

Sunday 31st July 2016
quotequote all
charltjr said:
If you can I'd look at getting something to hold the Nokia which is compatible with GoPro mounts and then use a GoPro mount to attach it to the roll bar - simply because it's become a generic standard and there are tons of cheap and decent kits out there.
Thanks, yes that's what I'm hoping for as I already have the mountings for the gopro. Unfortunately, so far my search has not found anything useful.


Fishy Dave

1,041 posts

251 months

Friday 5th August 2016
quotequote all
If you can get your mount to end in a 1/4" thread then you could use this: https://www.amazon.co.uk/gp/product/B01G1D43GQ/ref...

I bought one for my Samsung J5 last month and will give it a go at Castle Combe on Monday, on the road it seems ok so far with most flex coming from the way I've had to mount a base in my Z4M using Velcro!

T0MMY

1,559 posts

182 months

Friday 5th August 2016
quotequote all
I've got one of these:

http://www.dogcamsport.co.uk/ultra-clamp.html

Very sturdy, had no problems with it. Just check it's big enough for what you want to clamp it to as annoyingly it's a mm or 2 too small for the roll bar on my MNR (which is pretty wide to be fair). I can get it on by removing the plastic bit off the end of the clamping screw though.

smiles1

Original Poster:

543 posts

228 months

Friday 5th August 2016
quotequote all
Fishy Dave said:
If you can get your mount to end in a 1/4" thread then you could use this: https://www.amazon.co.uk/gp/product/B01G1D43GQ/ref...

I bought one for my Samsung J5 last month and will give it a go at Castle Combe on Monday, on the road it seems ok so far with most flex coming from the way I've had to mount a base in my Z4M using Velcro!
Thanks Dave, as it happens that's exactly what I bought yesterday!