Accord type r exhaust

[tkdsteve08]

Hi all quick one

What to get a performance exhaust system cat back for my atr now im not after one of these chav exhausts with a bore of 3 ft just something that sounds nice and improves power

[PJ S]

No point unless you also do the intake, manifold, and CAT - otherwise you'll only get a few horses, and a different tone.

[tkdsteve08]

I am running a skunk 2 inlet manifold and i want a full exhaust system including de cat

[hondafanatic]

There is an ATR owners forums - google it - you'd be better asking there.

[tkdsteve08]

Ok

[PJ S]

tkdsteve08 said:

I am running a skunk 2 inlet manifold and i want a full exhaust system including de cat

If Skunk have designed and inlet manifold for the ATR, then unless it's just a coincidence that it was shared with another engine, they're also likely to have an exhaust system, but probably only CAT-back.
Again, unless you have/also address the air intake, changing the complete exhaust system will be of only so much use, other than a different note.
There's a couple of noted custom exhaust fabricators here in the UK, whom you could spend similar money with, as you would importing something from Japan or the US.
http://www.haywardandscott.com/
http://www.aas-exhausts.co.uk/

Speaking with H&S, they've done a number of Accords, and if I'm right, your manifold is a two-piece, and they said the 2-1 section was only worth changing, as the upper is actually very good.
All in, you're looking about £800 (+VAT) inc. decat

[tkdsteve08]

st i need a manifold now help

[beaniexx]

mongoose is the one recommended highly for the atr looks mint not chavy, sounds really nice also not chavy. bad part costs alot

[tkdsteve08]

ok mongoose it is then £600 later

[sinbad666]

vtecdirect and solid fabrications both provide manifolds and exhausts for the ATR, gaining both power and noise.

[tkdsteve08]

Ok Cool
VTEC DIRECT

[tkdsteve08]

any number for vtec direct please no internet accsess soz

[PJ S]

0800 917 1874

[tkdsteve08]

vtec direct don't sell