F20C vs K20A

Author
Discussion

Bathroom_Security

Original Poster:

3,467 posts

124 months

Monday 25th May 2020
quotequote all
Looking at S2000's

How does an F20C compare to the K20A?

All i hear or read is that the F20C is gutless unless its on the boil, but then it was the same for the K20A when I bought a DC5 and actually it was completely fine low down and one of the best driving experiences Ive had up top. The top end more than made up for any lack of grunt low down, but even low down it was ok. Same story with the F20C? Long as it goes mental top end like the K20 does then I'd be happy. Gearing look short enough to make up for the low down grunt as well.

Cheers.

griffter

4,032 posts

262 months

Monday 25th May 2020
quotequote all
I can’t answer your question because I’ve never driven a K20A. But I have an S2000 after TVR, Lotus, Alpina and Porsche. It is what it is and it does what it does exactly as you describe. As long as you know what to expect I don’t think you’ll be disappointed. It certainly isn’t gutless, but to make progress you have to wring it out. The vtec point is noticeable (which is part of the fun) but it’s perfectly driveable when cruising out of vtec.

F17SRF

48 posts

55 months

Sunday 21st June 2020
quotequote all
https://youtu.be/MT6V1wYXRyE what about an s2000 with a k20?

chrismc1977

854 posts

119 months

Wednesday 24th June 2020
quotequote all
F20C is fine- if you’ve had a DC5 then it will be comparable

anonymous-user

61 months

Sunday 28th June 2020
quotequote all
F20C isn't gutless at all. The power delivery is linear even with VTEC. There is a small kick but the power is not "nothing nothing nothing - then everything" like some say. It gets up and goes from 3000.

My theory about the people with particularly strong feelings that an F20C is slow to pick up speed, is that they've driven a car with sticky calipers. It's really common on S2000s and both the pistons and the slider pins get stuck, so it's no good just swapping calipers - the caliper bracket slide pins need refurbishment too.

I have owned an EP3 too, so not a K20A. The behaviour is similar to the F20C.

shantybeater

1,197 posts

176 months

Friday 7th August 2020
quotequote all
F20 is adequate you just need to be a bit further up the rev range to still have the overtaking capabilities of an average diesel.

Good fun on the boil though as said.