Changing the gearing

Author
Discussion

wideboy

Original Poster:

16 posts

219 months

Friday 18th August 2006
quotequote all
hi im a novice biker really just use it for getting to work and back 14 mile round trip, and sometimes at the weeekends,

what i want to know is whether its possible to change the gearing on my montain bike to make it faster. I have hit 30 mph but ran out of legs,

neil_cardiff

17,113 posts

271 months

Friday 18th August 2006
quotequote all
How many legs do you need!!!

Honestly, either get a different cassete (cogs on the rear) that have a 11t cog on, or bigger chainrings.

However if its a cheap bike i.e. <£400 you're most likely buggered as those parts are not seperate nor easily replaced.

LRdriver II

1,936 posts

256 months

Friday 18th August 2006
quotequote all
go get a 62 tooth front ring along with a 10 tooth rear cog... that V-max you out

rico

7,916 posts

262 months

Friday 18th August 2006
quotequote all
One of these should suffice...



hehe

fixedwheelnut

743 posts

239 months

Sunday 20th August 2006
quotequote all
Try riding around on a lower gear for a while and practise pedalling faster
If you really want higher gearing check out Parkers international or settle cycles for TA chainrings , you can get them for most regular chainsets.
How large you can go will depend on the range your front mech changer can cope with and how much adjustment there is, ie bigger chainring further up the seat tube.
Oh and don't forget to check the chain length, if it is worn or stretched you may need to replace the whole lot together.