Identifying headset bearings for Whyte 901 (2012)
Discussion
Have a Whyte 901 that am giving a darn good seeing to (service )
Anyway, the headset bearing (top & bottom) both need replacing.
Whyte’s website just points to a few sets they have (that include all the spacers etc. as well as jus the bearings.
Now I can wait until Monday and contact them to identify exact ones, or are these all “standard” sizes etc? The ones that came out are about 40mm and 50mm diameter and about 5mm or so deep and are tapered.
I see the usual online cycle stores sell bearings, but which ones? Is is just based on size?
Anyway, the headset bearing (top & bottom) both need replacing.
Whyte’s website just points to a few sets they have (that include all the spacers etc. as well as jus the bearings.
Now I can wait until Monday and contact them to identify exact ones, or are these all “standard” sizes etc? The ones that came out are about 40mm and 50mm diameter and about 5mm or so deep and are tapered.
I see the usual online cycle stores sell bearings, but which ones? Is is just based on size?
Attached are links to the Whyte 2012 MY specification sheets which show the 2012 901 headset as a FSA Orbit ZS, Sealed Cartridge Bearings, 1.5” Lower, 1 1.8” Upper Bearing
https://whytebikes.com/pages/documents
https://cdn.shopify.com/s/files/1/0127/9963/9610/f...
https://whytebikes.com/pages/documents
https://cdn.shopify.com/s/files/1/0127/9963/9610/f...
Gassing Station | Pedal Powered | Top of Page | What's New | My Stuff