Kids Bike Hub Nut Size?

[scz4]

Evening all,

My youngest removed his front wheel before we loaded the bike into the boot yesterday. Unfortunately he didn't pick-up the nut and washer and it's 1hr 30 min round trip away.

Where can I buy one of these and what size do I need? I know it needs a 15mm spanner, but no idea what pitch the thread could be. M9 or M10 nut size?Hope these pictures help.

[The Road Crew]

Could it be an imperial thread? How old is it?

Edited by The Road Crew on Sunday 16th April 21:02

[WY86]

Bet it will be a 14mm, especially if the hub is 110mm wide like a bmx hub.

Ahh front hub my bad, will be 10mm.

[scz4]

It's a 2018. This is the bike here:

https://www.konaworld.com/archive/2018/shred_24.cf...

[WY86]

https://www.amazon.co.uk/Weldtite-WEL8032-Track-Nu...

[scz4]

WY86 said:

https://www.amazon.co.uk/Weldtite-WEL8032-Track-Nu...

Ordered, thanks.

[scz4]

scz4 said:

WY86 said:

https://www.amazon.co.uk/Weldtite-WEL8032-Track-Nu...

Ordered, thanks.

Nut arrived, unfortunately it doesn't fit. Not even a case of the wrong pitch, can't even get half a revolution, seems too small in diameter.

Any other suggestions?

[ARHarh]

Probably M10 by those measurements. But why not just take the wheel to.your local cycle shop or fastener supplier. Either should be able to find a match.

[gazza285]

M10 metric fine, 1mm pitch.

Halfords have them, as will any proper bike shop.

Track nuts for front wheels are 9mm, yours is not a track bike.