Covers/protection from rub on crank arms?

[Hugo Stiglitz]

New GRX cranks an already I can see slight wear. What do you use?

[MrBarry123]

So I used to suffer from the same until I got a good bike fit.

Aren’t you better off taking a look at your clear positioning as mine was off, hence the crank rub?

[Court_S]

I use Invisiframe on mine, they tend to be more MTB orientated though.

[lufbramatt]

Could use 3m Helitape, cheapest I found was Tweeks cycles/ Demon tweeks.

I think the GRX crank arms are just prone to it, must have a different shape due to the wider axle coupled with a dark colour makes it more obvious, I don't rub any of my other bikes using the same shoes and cleats, just the cranks on my CX bike.

I just accepted it was a bike that going to get covered in mud and crap and fallen off of lots and won't stay perfect, so ignored it

[Hugo Stiglitz]

MrBarry123 said:

So I used to suffer from the same until I got a good bike fit.

Aren’t you better off taking a look at your clear positioning as mine was off, hence the crank rub?

I like a lot of float. My XT cranks are hideously marked! (flats)

[MrBarry123]

Hugo Stiglitz said:

I like a lot of float. My XT cranks are hideously marked! (flats)

Fair enough.

Got to be Helitape then!

[Dannbodge]

Invisiframe on my DA cranks.
It's brilliant, fits perfectly and you can't see it